1788481 BELT-SERPENTINE Caterpillar parts
140H, C11, C13
Rating:
Alternative (cross code) number:
CA1788481
178-8481
1788481
CA1788481
178-8481
1788481
Weight: 0.60 pounds 0 kg.
Information:
BELT SIZE
.16
mm
EFFECTIVE LENGTH
2275
mm
NUMBER OF RIBS
8
CROSS SECTION
PK
MOTOR GRADER, TRUCK ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
NDYHSGL Ignition Coils Fits 1788481 Sold individually
NDYHSGL Fitment:Please check top Automotive Fitment Filter and Description to see if this item will work on your vehicle before purchase! || Part_Number:178-8481 || Condition: 100% New in factory packaging, never used or installed. Ensures quality and performance of the product. || Built : Built with and care to meet industry standards for quality control, ensuring reliable and consistent performance. || Material: The item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and performance.
NDYHSGL Fitment:Please check top Automotive Fitment Filter and Description to see if this item will work on your vehicle before purchase! || Part_Number:178-8481 || Condition: 100% New in factory packaging, never used or installed. Ensures quality and performance of the product. || Built : Built with and care to meet industry standards for quality control, ensuring reliable and consistent performance. || Material: The item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and performance.
Ignition Coils for 1.8L 2001-2005 178-8481
HMYHBD This car ignition coil is made of good materials to ensure good connectivity and long-term use. It has the advantages of easy installation, light and portable, good fit, and long-lasting durability. It can solve the problems caused by coil failure. || Our car ignition coil is designed for replacement and can match the OE design to ensure quick and easy installation and good performance. In order to make the ignition coil last longer, please pay attention to the condition of the spark plug. This ignition coil is a good car accessory. || The car ignition coil is an engine management component and a part of the vehicle's ignition system. It can be well adapted to your car. At the same time, the material of this car ignition coil can ensure its higher reliability and better performance. || This car ignition coil is designed to ensure good operation under all operating conditions and throughout the engine speed range, achieve good engine performance, and reduce common ignition coil problems. || This car ignition coil is easy to install and can be installed directly. It only takes a few minutes to express it. To ensure that this car ignition coil is suitable for your vehicle, please check the model carefully when purchasing to avoid buying the wrong product.
HMYHBD This car ignition coil is made of good materials to ensure good connectivity and long-term use. It has the advantages of easy installation, light and portable, good fit, and long-lasting durability. It can solve the problems caused by coil failure. || Our car ignition coil is designed for replacement and can match the OE design to ensure quick and easy installation and good performance. In order to make the ignition coil last longer, please pay attention to the condition of the spark plug. This ignition coil is a good car accessory. || The car ignition coil is an engine management component and a part of the vehicle's ignition system. It can be well adapted to your car. At the same time, the material of this car ignition coil can ensure its higher reliability and better performance. || This car ignition coil is designed to ensure good operation under all operating conditions and throughout the engine speed range, achieve good engine performance, and reduce common ignition coil problems. || This car ignition coil is easy to install and can be installed directly. It only takes a few minutes to express it. To ensure that this car ignition coil is suitable for your vehicle, please check the model carefully when purchasing to avoid buying the wrong product.
LNMTLZHHM Ignition Coils Fits 1788481
LNMTLZHHM Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase! || Quantity Sold: Sold individually || Part_Number: 178-8481,2001-2003,2001-2005,2004-2005 || Condition: 100% new in package. Never be installed or used. || Built to strict quality control standards
LNMTLZHHM Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase! || Quantity Sold: Sold individually || Part_Number: 178-8481,2001-2003,2001-2005,2004-2005 || Condition: 100% new in package. Never be installed or used. || Built to strict quality control standards
Number on catalog scheme:
2
For full view, you need register
Information:
3208 ( 90N, 40S, 75V, 32Y ),
3406 ( 92U ),
3408 ( 28V)Installation and correct maintenance of a coolant conditioner group on the above engines can help to give maximum protection to the inner surface of the cylinder block. A solid corrosion inhibitor within the element assembly of the conditioner group will dissolve (mix with the coolant) as the coolant flows through it, to add the correct amount of inhibitor needed for cooling system protection.
The coolant conditioner group must not be used with Dowtherm 209.
Parts Needed
Use hose that is of SAE J1402, TYPE D, CLASS 2 quality. Because the base assembly will not be installed on the engine, but either near it or in the engine compartment, the length of hose needed will not be known until the time of hose assembly installation. Get the needed additional fittings and connectors from a local source of supply.Installation
1 Install one 9N3666 Valve Assembly (1) in the top (OUT) hole, and one 9N3666 Valve Assembly (2) in one of the (IN) holes of 9N3668 Base Assembly (3), according to the location where the base is to be installed. Put a 3/8"-16 pipe plug in each of the other two (IN) holes that are not used. Install the base assembly in a location that will give good access to element assembly (4). See the illustrations that follow for hose connection points on the engine. 2 For 3406 Truck Engines, remove one of the plugs (5), install a fitting in the plug hole and connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove one of the plugs (6), install a fitting, and connect a hose from the fitting to valve (1) in the OUT port of the base assembly. 3 For 3408 Truck Engines remove one of the plugs (7), install a fitting in the plug hole and connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove one of the plugs (8), install a fitting, and connect a hose from the fitting to valve (1) in the OUT port of the base assembly. 4 For 3208 Engines, remove a plug at either location (9) or (10) and install a fitting in the plug hole. Connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove a plug from hole (A) or (B) and install the fittings and hose needed to connect this port to valve (1) in the OUT port of the base assembly.5 For 3208 Marine Engines, a hole on the front right side of the cylinder block (hole is normally used to drain the cylinder block water jacket) can also be used as a source of supply to connect to the IN port of the base assembly. If this is done, port (B) or the hole for plug (11) (shown in the illustration that follows) must be used as a return port. 6 For 3208 Marine Engines,
3406 ( 92U ),
3408 ( 28V)Installation and correct maintenance of a coolant conditioner group on the above engines can help to give maximum protection to the inner surface of the cylinder block. A solid corrosion inhibitor within the element assembly of the conditioner group will dissolve (mix with the coolant) as the coolant flows through it, to add the correct amount of inhibitor needed for cooling system protection.
The coolant conditioner group must not be used with Dowtherm 209.
Parts Needed
Use hose that is of SAE J1402, TYPE D, CLASS 2 quality. Because the base assembly will not be installed on the engine, but either near it or in the engine compartment, the length of hose needed will not be known until the time of hose assembly installation. Get the needed additional fittings and connectors from a local source of supply.Installation
1 Install one 9N3666 Valve Assembly (1) in the top (OUT) hole, and one 9N3666 Valve Assembly (2) in one of the (IN) holes of 9N3668 Base Assembly (3), according to the location where the base is to be installed. Put a 3/8"-16 pipe plug in each of the other two (IN) holes that are not used. Install the base assembly in a location that will give good access to element assembly (4). See the illustrations that follow for hose connection points on the engine. 2 For 3406 Truck Engines, remove one of the plugs (5), install a fitting in the plug hole and connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove one of the plugs (6), install a fitting, and connect a hose from the fitting to valve (1) in the OUT port of the base assembly. 3 For 3408 Truck Engines remove one of the plugs (7), install a fitting in the plug hole and connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove one of the plugs (8), install a fitting, and connect a hose from the fitting to valve (1) in the OUT port of the base assembly. 4 For 3208 Engines, remove a plug at either location (9) or (10) and install a fitting in the plug hole. Connect a hose from the fitting to valve (2) in the IN port of the base assembly. Remove a plug from hole (A) or (B) and install the fittings and hose needed to connect this port to valve (1) in the OUT port of the base assembly.5 For 3208 Marine Engines, a hole on the front right side of the cylinder block (hole is normally used to drain the cylinder block water jacket) can also be used as a source of supply to connect to the IN port of the base assembly. If this is done, port (B) or the hole for plug (11) (shown in the illustration that follows) must be used as a return port. 6 For 3208 Marine Engines,
Caterpillar parts catalog:
Parts belt Caterpillar catalog:
2845326
BELT GP-SERPENTINE
C11, C13
C11, C13
C11, C13
3126, 3126B, 3406E, 345B II, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 637D, 637E, 637G, 657E, 657G, 773F, 775F, 777C, 777D, 793F, 793F-XQ, 795F AC, 797, 797B, 797F, 854K, 924H, 924HZ, 928HZ, 99...
12M, 140G, 140H, 140M, 143H, 14H, 160H, 163H, 16H, 3126B, 3126E, 3176C, 3196, 3406E, 385B, 5090B, 725, 730, AD30, BG-2455D, C-10, C-12, C-15, C-16, C-18, C15, C18, C7, C9, CX31-C9I, CX35-P800, TH31-E6...
C11, C13, C7, C9, CX31-C9I, TH31-E61
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, C11, C13, C7, C9, CX31-C9I, TH31-E61, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, C11, C13, CX31-C13I, RM-300, TH35-C11I, TH35-C13I, W345C MH
C11, C13, TH35-C13T
C11, C13, C15
C11, C13, TH35-C13T
2534012
BELT-SERPENTINE
C11, C13, TH35-C13T
C11, C13, TH35-C13T
140H, 16H, 725, 730
2534012
BELT-SERPENTINE
C11, C13, TH35-C13T
C11, C13, TH35-C13T
C11, C13, TH35-C13T
C11, C13, C15
C11, C13, TH35-C13T
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, C11, C13, CX31-C13I, RM-300, TH35-C11I, TH35-C13I, W345C MH
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, C11, C13, C7, C9, CX31-C9I, TH31-E61, W345C MH
AP-655D, C7