1S1127 BELT SET-VEE Caterpillar parts
330 L, 330B L, E300, W330B
Rating:
Alternative (cross code) number:
CA1S1127
1S-1127
1S1127
CA1S1127
1S-1127
1S1127
Weight: 1 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
PHUOC LOC THO for Caterpillar Replacement Belt. Replace 1S1127 Cogged Vbelt (5/8X58) BX55
PHUOC LOC THO For Caterpillar Replacement Belt. Replace 1S1127 Cogged Vbelt (5/8X58) BX55 || replacement belt for equipment, designed to replace the 1S1127 cogged Vbelt (58X58) BX55 efficiently and effectively. || and reliable Vbelt with specific dimensions (58X58) to ensure fit and performance in your machinery. || Upgrade Your Gear, Upgrade Your Performance – Choose Our Reliable Replacement Parts. || To ensure a perfect fit and make an informed decision, we encourage you to carefully review both the product's dimensions and visually inspect it in the provided photos.
PHUOC LOC THO For Caterpillar Replacement Belt. Replace 1S1127 Cogged Vbelt (5/8X58) BX55 || replacement belt for equipment, designed to replace the 1S1127 cogged Vbelt (58X58) BX55 efficiently and effectively. || and reliable Vbelt with specific dimensions (58X58) to ensure fit and performance in your machinery. || Upgrade Your Gear, Upgrade Your Performance – Choose Our Reliable Replacement Parts. || To ensure a perfect fit and make an informed decision, we encourage you to carefully review both the product's dimensions and visually inspect it in the provided photos.
CTP 1S1127 External Engine V-Belt, 15/16" Size, 56" Length, Pack of 2
CTP For External engine || 15/16" Size || 56" Length || Pack of 2
CTP For External engine || 15/16" Size || 56" Length || Pack of 2
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1S1127:
Information:
Removal Procedure
Start By:
If necessary, remove the clean emissions module. Refer to Disassembly and Assembly, "Clean Emissions Module - Remove and Install" for the correct procedure.
Illustration 1 g03389321
Typical example
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1). Slide connection for harness assembly (1) from the bracket (3).
Loosen Allen head bolts (5). Ensure that at least three threads of the Allen head bolts are retained in the inlet air control assembly (6).
Illustration 2 g03389341
Typical example
Position a suitable tool in contact with the exhaust gas valve (4) at Position (A). Use a uniform force on the tool in order to remove the exhaust gas valve (4) out of the inlet air control assembly (6).
Illustration 3 g03389345
Typical example
Remove bolts (5). Remove the exhaust gas valve (4) from the inlet air control assembly (6). Note: Do not twist the exhaust gas valve as the exhaust gas valve is removed from the inlet air control assembly.
Remove O-ring seal (7). Installation Procedure
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 4 g03389345
Typical example
Illustration 5 g03389321
Typical example
Ensure that the bore in inlet air control assembly (6) for exhaust gas valve (4) is clean and free from damage. If necessary, replace the inlet air control assembly.
If the original exhaust gas valve (4) is to be installed, ensure that the sealing surfaces are clean and free from damage.
Install a new O-ring seal (7) to the exhaust gas valve (4).
Lightly lubricate the surfaces of exhaust gas valve (4) with clean engine oil.
Install the exhaust gas valve (4) to the inlet air control assembly (6).
Install Allen head bolts (5) to exhaust gas valve (4). Tighten Allen head bolts to a torque of 9 N m (80 lb in).
Slide the connection for harness assembly (1) onto bracket (3). Connect harness assembly (1). Slide locking tab (2) into the locked position. End By:
If necessary, install the clean emissions module. Refer to Disassembly and Assembly, "Clean Emissions Module - Remove and Install" for the correct procedure.
Start By:
If necessary, remove the clean emissions module. Refer to Disassembly and Assembly, "Clean Emissions Module - Remove and Install" for the correct procedure.
Illustration 1 g03389321
Typical example
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1). Slide connection for harness assembly (1) from the bracket (3).
Loosen Allen head bolts (5). Ensure that at least three threads of the Allen head bolts are retained in the inlet air control assembly (6).
Illustration 2 g03389341
Typical example
Position a suitable tool in contact with the exhaust gas valve (4) at Position (A). Use a uniform force on the tool in order to remove the exhaust gas valve (4) out of the inlet air control assembly (6).
Illustration 3 g03389345
Typical example
Remove bolts (5). Remove the exhaust gas valve (4) from the inlet air control assembly (6). Note: Do not twist the exhaust gas valve as the exhaust gas valve is removed from the inlet air control assembly.
Remove O-ring seal (7). Installation Procedure
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 4 g03389345
Typical example
Illustration 5 g03389321
Typical example
Ensure that the bore in inlet air control assembly (6) for exhaust gas valve (4) is clean and free from damage. If necessary, replace the inlet air control assembly.
If the original exhaust gas valve (4) is to be installed, ensure that the sealing surfaces are clean and free from damage.
Install a new O-ring seal (7) to the exhaust gas valve (4).
Lightly lubricate the surfaces of exhaust gas valve (4) with clean engine oil.
Install the exhaust gas valve (4) to the inlet air control assembly (6).
Install Allen head bolts (5) to exhaust gas valve (4). Tighten Allen head bolts to a torque of 9 N m (80 lb in).
Slide the connection for harness assembly (1) onto bracket (3). Connect harness assembly (1). Slide locking tab (2) into the locked position. End By:
If necessary, install the clean emissions module. Refer to Disassembly and Assembly, "Clean Emissions Module - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts belt Caterpillar catalog:
0960728
BELT, TETHER
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
0946332
BELT, LAP
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
0946333
BELT, LAP
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, E70B, EL240B
1098613
BELT
350, 350 L
350, 350 L
345B, 345B II, 345B L
2M4049
BELT
12E
12E
9D8386
BELT
12G, 16G
12G, 16G
9D5457
BELT
12G, 16G
12G, 16G
3826244
BELT-DRIVE
HM415B
HM415B
345B II, 345B L
345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, W345B II
