2198689 BELT-SERPENTINE Caterpillar parts
583T, 587T, D8R, D8T, PL83, PL87
Rating:
Alternative (cross code) number:
CA2198689
219-8689
2198689
CA2198689
219-8689
2198689
Weight: 0.70 pounds 0 kg.
Information:
BELT SIZE
.17
mm
EFFECTIVE LENGTH
2555
mm
NUMBER OF RIBS
8
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2198689 Belt Serpentine (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.75 lbs || Dimensions: 10-10-17.75 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.75 lbs || Dimensions: 10-10-17.75 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
2198689 Belt Serpentine (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.75 lbs || Dimensions: 10-10-17.75 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 0.75 lbs || Dimensions: 10-10-17.75 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
2198689 Serpentine Belt fits Caterpillar 583T 587T PL83 PL87 D8R D8R II D8R LRC D8T
ZBOX 【FITMENT MODELS】 Fits Caterpillar 583T - 587T - D8R - D8R II - D8R LRC - D8T - PL83 - PL87 || 【AMERICAN OWNED & OPERATED】Fully owned and operated within the United States, our business is dedicated to contributing to local economies, supporting American jobs, and fostering community growth. || 【QUALITY REPLACEMENT】Engineered for durability and performance, our parts meet or exceed OEM specifications. Ideal for construction and agriculture machinery, ensuring reliability and efficiency in tough working conditions. || 【EASY INSTALLATION】Our parts are designed for a straightforward fit, making maintenance quick and simple, which helps reduce downtime and keep your equipment running smoothly.
ZBOX 【FITMENT MODELS】 Fits Caterpillar 583T - 587T - D8R - D8R II - D8R LRC - D8T - PL83 - PL87 || 【AMERICAN OWNED & OPERATED】Fully owned and operated within the United States, our business is dedicated to contributing to local economies, supporting American jobs, and fostering community growth. || 【QUALITY REPLACEMENT】Engineered for durability and performance, our parts meet or exceed OEM specifications. Ideal for construction and agriculture machinery, ensuring reliability and efficiency in tough working conditions. || 【EASY INSTALLATION】Our parts are designed for a straightforward fit, making maintenance quick and simple, which helps reduce downtime and keep your equipment running smoothly.
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 2198689:
Information:
Transmission ECM
The following is a list of Diagnostic Trouble Codes (DTCs) that are associated with the PWM Sensors of the machine.
Table 1
Diagnostic Trouble Codes (DTC) - MID 027
DTC Code Description System Response
127-03 Transmission Oil Pressure Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
127-04 Transmission Oil Pressure Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed.
127-08 Transmission Oil Pressure Sensor: Abnormal Frequency, Pulse Width, or Period Diagnostic code logged. Transmission operation still allowed.
177-03 Transmission Oil Temperature Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
177-04 Transmission Oil Temperature Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed.
702-02 Transmission Gear Lever Selector Sensor (Switch): Data Erratic, Intermittent, or incorrect Diagnostic code logged. Transmission operation still allowed.
702-08 Transmission Gear Lever Selector Sensor (Switch): Abnormal Frequency, Pulse Width, or Period Diagnostic code logged. Transmission operation still allowed.
826-03 Torque Converter Oil Temperature Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
826-04 Torque Converter Oil Temperature Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed. Pulse Width Modulation (PWM) is a technique for controlling analog circuits with digital outputs. PWM is employed in various applications ranging from measurement to communication with the Electronic Control Module (ECM). The duty cycle of a square wave is modulated to encode a specific analog signal level. The duty cycle is the ratio of the ON time to the period. The modulating frequency is the inverse of the period. The duty cycle is programmed into the software of the ECM. The engineer sets the following parameters:
The period in the on-chip timer counter that provides the modulating square wave.
The direction of the PWM output along with the ON time in the PWM control register.One of the advantages of the PWM sensor is that the signal is digital from the ECM to the controlled system. No digital-to-analog conversion is necessary. By using a digital signal, noise effects are minimized. Noise affects a digital signal if the noise can change a logic 1 to a logic 0 or a logic 0 to a logic 1.Possible Causes for an FMI 03 Diagnostic code are:
The sensor has failed.
The sensor supply or the ground circuit in the machine harness is open.
The signal circuit in the machine harness is shorted to the +Battery.
The signal circuit in the machine harness is open or the sensor is disconnected.
The Machine ECM has failed (unlikely).Possible Causes for an FMI 04 Diagnostic code are:
The sensor has failed.
The signal circuit in the machine harness is shorted to ground.
The Machine ECM has failed (unlikely).Possible Causes for an FMI 08 Diagnostic code are:
The sensor has failed.
Intermittent connections or poor connections.Note: Prior to beginning this procedure, use Cat® Electronic Technician (Cat ET) Service Tool or the machine monitors to check for an active CID 41 code. The CID 41 indicates a failure of the 8 VDC power supply on the ECM. If the code is present, refer to the Troubleshooting, "Sensor Supply - Test" story to correct this problem before continuing. For
The following is a list of Diagnostic Trouble Codes (DTCs) that are associated with the PWM Sensors of the machine.
Table 1
Diagnostic Trouble Codes (DTC) - MID 027
DTC Code Description System Response
127-03 Transmission Oil Pressure Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
127-04 Transmission Oil Pressure Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed.
127-08 Transmission Oil Pressure Sensor: Abnormal Frequency, Pulse Width, or Period Diagnostic code logged. Transmission operation still allowed.
177-03 Transmission Oil Temperature Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
177-04 Transmission Oil Temperature Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed.
702-02 Transmission Gear Lever Selector Sensor (Switch): Data Erratic, Intermittent, or incorrect Diagnostic code logged. Transmission operation still allowed.
702-08 Transmission Gear Lever Selector Sensor (Switch): Abnormal Frequency, Pulse Width, or Period Diagnostic code logged. Transmission operation still allowed.
826-03 Torque Converter Oil Temperature Sensor: Voltage Above Normal Diagnostic code logged. Transmission operation still allowed.
826-04 Torque Converter Oil Temperature Sensor: Voltage Below Normal Diagnostic code logged. Transmission operation still allowed. Pulse Width Modulation (PWM) is a technique for controlling analog circuits with digital outputs. PWM is employed in various applications ranging from measurement to communication with the Electronic Control Module (ECM). The duty cycle of a square wave is modulated to encode a specific analog signal level. The duty cycle is the ratio of the ON time to the period. The modulating frequency is the inverse of the period. The duty cycle is programmed into the software of the ECM. The engineer sets the following parameters:
The period in the on-chip timer counter that provides the modulating square wave.
The direction of the PWM output along with the ON time in the PWM control register.One of the advantages of the PWM sensor is that the signal is digital from the ECM to the controlled system. No digital-to-analog conversion is necessary. By using a digital signal, noise effects are minimized. Noise affects a digital signal if the noise can change a logic 1 to a logic 0 or a logic 0 to a logic 1.Possible Causes for an FMI 03 Diagnostic code are:
The sensor has failed.
The sensor supply or the ground circuit in the machine harness is open.
The signal circuit in the machine harness is shorted to the +Battery.
The signal circuit in the machine harness is open or the sensor is disconnected.
The Machine ECM has failed (unlikely).Possible Causes for an FMI 04 Diagnostic code are:
The sensor has failed.
The signal circuit in the machine harness is shorted to ground.
The Machine ECM has failed (unlikely).Possible Causes for an FMI 08 Diagnostic code are:
The sensor has failed.
Intermittent connections or poor connections.Note: Prior to beginning this procedure, use Cat® Electronic Technician (Cat ET) Service Tool or the machine monitors to check for an active CID 41 code. The CID 41 indicates a failure of the 8 VDC power supply on the ECM. If the code is present, refer to the Troubleshooting, "Sensor Supply - Test" story to correct this problem before continuing. For
Caterpillar parts catalog:
Parts belt Caterpillar catalog:
1182044
BELT TENSIONER GP
583R, 587R, D8R
583R, 587R, D8R
3406E, 583T, 587T, C-12, C-15, C-16, C-9, C13, C15, D8T, TH35-C13T
120K, 120K 2, 12K, 140K, 140K 2, 160K, 583T, 587T, C7, C9, CX31-C9I, D8R, D8T, PL83, PL87, TH31-E61
2403373
BELT-SERPENTINE
561N, D5N
561N, D5N
D5N, D6N
938G II, 950H, 962H, D5N, D6N, IT38G II, IT62H
D5N, D6N
D3K XL, D4K XL, D5K LGP
D6R III
D6R, D6R III, D6R STD, D6T, D7R XR
3570490
BELT-SERPENTINE
D6T LGP, D6T XL
D6T LGP, D6T XL
2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, D6T LGP, D6T LGPPAT, D6T XL
2919310
BELT-TETHER
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61