BELT TENSIONER GP 2385493 - Caterpillar

Illustration 4 g01133672
Illustration 5 g01139262
Install front cab mounting bolt (22). Use Tooling (B) to tighten bolt (22) to a torque of 1500 200 N m (1106 148 lb ft). Repeat for the other side.
Illustration 6 g02048233
Remove Tooling (A) and install bolts (19) to the top of cab (20).
Illustration 7 g02048194
Install sheet assembly (18) and sheet (17).
Illustration 8 g01133612
Install guard assembly (16) to the left side of the machine.
Illustration 9 g01133611
Connect harness assemblies (15) and the mounting hardware.
Illustration 10 g02048134
Connect harness assemblies (14) and the mounting hardware.
Illustration 11 g01133589
Use two people to install cover assembly (13). The weight of cover assembly (13) is approximately 23 kg (50 lb).
Illustration 12 g01133586
Connect ground strap (12).
Illustration 13 g01133585
Connect hoses (10). Connect hose assemblies (11).
Illustration 14 g01133584
Install cover assemblies (9).
Illustration 15 g01133567
Connect hoses (8) to the windshield washer pumps.
Illustration 16 g01133562
Connect hose assemblies (7).
Illustration 17 g01133561
Move brake control valve (6) into position and install nuts (5).
Illustration 18 g01133530
Place parking brake cable assembly (4) into position. Tighten nut (3) and install pin (2).
Illustration 19 g01133525
Install shroud (1).End By:
Separate the steering frame lock.