2610377 BELT-SERPENTINE Caterpillar parts
C4.4, C6.6
Rating:
Alternative (cross code) number:
CA2610377
261-0377
2610377
CA2610377
261-0377
2610377
Weight: 0.41 pounds 0 kg.
Information:
BELT SIZE
0
mm
EFFECTIVE LENGTH
1475
mm
NUMBER OF RIBS
8
CROSS SECTION
K
INDUSTRIAL ENGINE,
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01022510
Remove bolt (1) and piston cooling jet (2) from each cylinder.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01022510
Position piston cooling jet (2) and install bolt (1) in each cylinder. Tighten the bolt to a torque of 30 7 N m (22 5 lb ft).End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01022510
Remove bolt (1) and piston cooling jet (2) from each cylinder.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01022510
Position piston cooling jet (2) and install bolt (1) in each cylinder. Tighten the bolt to a torque of 30 7 N m (22 5 lb ft).End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts belt Caterpillar catalog:
450E, C4.4
C4.4, C6.6
120K, 120K 2, 12K, 12M, 140K, 140K 2, 160K, 3126, 3126B, 3126E, 573, 584, 814F II, 815F II, 816F II, 938H, 953D, 963D, 973D, AP-600D, AP-655D, AP555E, BG500E, BG600D, BG655D, C-9, C6.6, C7, C9, CX31-C...
2935248
BELT-SERPENTINE
C4.4, C6.6
C4.4, C6.6
3096655
BELT-SERPENTINE
C4.4, C6.6
C4.4, C6.6
C4.4, C7.1, CB-44B, CB-54B, CP-54B, CP-68B, CP-74B, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CS-78B, CW-34
3652968
BELT-SERPENTINE
C4.4, D3K2 LGP
C4.4, D3K2 LGP
C4.4, D4K XL, D5K LGP
2935248
BELT-SERPENTINE
C4.4, C6.6
C4.4, C6.6
953D, 963D, C6.6, D6K, D6K LGP, D6K XL, PL61
2867845
BELT-SERPENTINE
C4.4, C6.6, CB-44B, CB-54, CB-54B, CB-64, CP-54B, CP-68B, CP-74B, CS-54, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CW-34
C4.4, C6.6, CB-44B, CB-54, CB-54B, CB-64, CP-54B, CP-68B, CP-74B, CS-54, CS-54B, CS-56B, CS-64B, CS-66B, CS-76B, CW-34
3108861
BELT-SERPENTINE
C0.5, C0.7
C0.5, C0.7
3512C, 793D, 797B, 854G, 992G, 994F, 994H
3096655
BELT-SERPENTINE
C4.4, C6.6
C4.4, C6.6