BELT-SERPENTINE 2985867 - Caterpillar

Illustration 1 g00753277
Position for normal travel
(A) Rear of machine
(B) Final drive
(C) Idler When you travel, make sure that final drive sprockets (B) are under the rear of the machine.Directional changes at full engine speed are possible. However, decelerating and/or braking is recommended for operator comfort. Decelerating and/or braking will also help to achieve the maximum service life of the transmission components.If the travel alarm (if equipped) does not sound, consult your Caterpillar dealer.Stop - Release the travel levers/pedals in order to stop the machine. When you release the travel levers/pedals from any position, the travel levers/pedals will return to the CENTER position. This applies the travel brakes.Move both of the travel levers or both of the travel pedals equally in the same direction in order to travel straight.
Illustration 2 g00731542
Forward Travel
Illustration 3 g00731543
Reverse Travel
Illustration 4 g00731472
Pivot Left Turn (Forward)
Illustration 5 g00731478
Pivot Left Turn (Reverse)
Illustration 6 g00731476
Counterrotate Turn (Left)
Illustration 7 g00731471
Pivot Right Turn (Forward)
Illustration 8 g00731479
Pivot Right Turn (Reverse)
Illustration 9 g00731477
Counterrotate Turn (Right)