BELT-FAN 3850147 - Caterpillar

Illustration 1 g00995663
Alignment
Illustration 2 g00918672
Front cover
Table 1
Callout Quantity Part Specification Description
- - Alignment The front housing must be aligned to the cylinder block face. + 0.05 to minus 0.05 mm (+ 0.0020 to minus 0.0020 inch )
1 - Front cover Tighten the bolts that fasten the front cover to the front housing to the following torque. 22 N m (16 lb ft)
2 - Water pump Tighten the bolts that fasten the water pump to the front housing to the following torque. 22 N m (16 lb ft) Note: Refer to Specifications, "Water Pump" for the correct bolt tightening sequence for the water pump.