BELT TENSIONER GP 4P1705 - Caterpillar

4P1705 BELT TENSIONER GP Caterpillar parts 578, D8N

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4P1705
4P-1705
4P1705

Weight: 0.30 pounds 0 kg.

Buy BELT TENSIONER GP 4P1705 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

WVE by NTK 4P1705 HVAC Blower Motor Resistor

$36.14

08 Feb 2024
0.17[0.08] Pounds
Amazon.com

WVE by NTK 4P1705 HVAC Blower Motor Resistor
WVE by NTK Blower motor resistors divert power or ground through resistors to control blower motor speed || When not replaced, blower will either not function or will not run at all speeds || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications

$27.12

21 Jan 2023
0.17[0.08] Pounds
Amazon.com

$41.55

30 Aug 2022
0.17[0.08] Pounds
Amazon.com

Number on catalog scheme:

Caterpillar 4P1705 Parts scheme BELT TENSIONER GP

For full view, you need register

Compatible equipment models: 4P1705:

PIPELAYER 578

TRACK-TYPE TRACTOR D8N Caterpillar

Information:

Illustration 1 g00733698
Note: The dimension for callout (1) is measured with the handle (A) in the engaged position. This is an initial adjustment. (1) The distance from the bottom of the pin to the bottom surface of the assembly ... 120 3 mm (4.72 0.12 inch) (2) Tighten the three 8S-4734 Bolts to the following torque. ... 122 14 N m (90 10 lb ft) (3) During the adjustment procedure, tighten the nut (3) to the following torque. ... 60 to 75 N m (44 to 55 lb ft)Note: The handle (A) must be in the disengaged position and the lever (5) must be in the horizontal position in order to tighten the nut (4) . (4) During the adjustment procedure, tighten the nut to the following torque. After you tighten nut (4) , turn the nut (4) counterclockwise for 5/6 turn and check that the disc is free to move. This must be performed before you tighten nut (3) . ... 12 2 N m (106 18 lb in)After the adjustment procedure is completed use the following torques. Tighten nut (4) to the following torque. Make sure that the brake pads contact the disc. Turn nut (4) counterclockwise by 5/6 turn. ... 13 N m (9.6 lb ft) Tighten nut (3) to the following torque. ... 61 to 75 N m (45 to 55 lb ft)
Illustration 2 g00754444
(5) Maximum rotation of the brake assembly lever ... 45° (6) Tighten the mounting bolts for the bracket to the following torque. ... 44 to 51 N m (32 to 38 lb ft) (7) Dimension between the nut and the sleeve ... 0.25 to 1.52 mm (0.0098 to 0.0598 inch) (8) Tighten the nut to the following torque. ... 150 N m (110 lb ft)The brake assembly accommodates a 10 mm (0.39 inch) disc.