BELT GP 5063467 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7505     Hydraulic Jack     1    
1U-7506 Mounting Adapter Gp     1    
C     1P-0510     Driver Gp     1    
Illustration 1 g01042002
Illustration 2 g01041857
Use Tooling (C) and install a new bushing (6) and seal (5) .
Repeat Step 1 for the other side of the axle.
Illustration 3 g01041854
The weight of the axle is approximately 408 kg (900 lb). Use Tooling (A) and position the axle on the machine. Position any shims that were removed during the removal process. Install pin assembly (3). Install bolt (2) into pin assembly (3). Connect hose assemblies (1) .
Remove the brace and lower the lift arms. Refer to Operation and Maintenance Manual, "Safety Messages".End By:
Install the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
Install the tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
Install the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".