BELT GP 5114673 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     LOCTITE® HI-TEMP FLANGE SEALANT     -    Note: Refer to Specification UENR3421 "Engine Design" for non-specified engine Torque Values.
Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the proper draining and filling procedures.
Illustration 1 g02797578
Remove bolts (2) and remove oil pan (1) .
Illustration 2 g02797579
Remove Tooling (A) from oil pan (1) and cylinder block (3) surfaces.Installation Procedure
Apply Tooling (A) about 3.0 to 5.0 mm (0.12 to 0.19 inch) thick onto the cylinder block surface. Within 20 minutes after the application of Tooling (A) , reassemble the components.
Install oil pan (1) in the reverse order of removal.