BELT-ABRASIVE 5164613 - Caterpillar

1. Remove three bolts (1) that hold the rubber flashing to the tail cone assembly. 2. Remove exhaust elbow (2) and disconnect wire (4) to the tail lights. Remove wire ties as necessary.3. Remove two bolts (3) that hold the back-up alarm to the tail cone assembly. Set the back-up alarm on top of the battery. 4. Attach hoist to the tail cone assembly. Remove four bolts (6) from each side and two bolts (7) from the back.5. Remove tail cone assembly (5). The weight of the tail cone assembly is 91 kg (200 lb). For installation of the tail cone assembly, reverse the removal steps.End By:a. install hood