BELT- 5185330 - Caterpillar

1. Loosen the hose clamp, and remove hood (1) from the air cleaner housing.2. Loosen the bolt, and remove exhaust pipe (2) and the clamp from the muffler.3. Remove the eight bolts, and remove top panel (3) from the machine. 4. Remove two bolts (4) that fasten backup alarm (5) to the cowling. Mark the two electrical wires for assembly purposes, and disconnect them from the backup alarm.5. For assembly purposes, mark the two electrical wires on two rear lights (6). Disconnect the two electrical wires from each of the rear lights.6. Remove the cable ties that fasten electrical harness (7) to the cowling, and move the electrical harness out of the way. 7. Attach lifting straps and a hoist to engine enclosure (8) as shown. The engine enclosure consists of the left and right doors, the cowling and the radiator grill. Remove eight bolts (9) that fasten the engine enclosure to the frame, and remove the engine enclosure. The weight of the engine enclosure is 128 kg (282 lb). For Installation of the engine enclosure, reverse the removal steps.