9B1151 BEZEL & GLASS ASSEM. Caterpillar parts
D315
Rating:
Alternative (cross code) number:
CA9B1151
9B-1151
9B1151
CA9B1151
9B-1151
9B1151
Weight: 0.010 pounds 0 kg.
MARINE ENGINE,
Compatible equipment models: 9B1151:
Number on catalog scheme:
None
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1
Illustration 1 g06341523
Install eight nuts (15).
Tighten eight nuts (15) to a torque of 55 10 N m (41 7 lb ft).
Illustration 2 g01228274
Typical Example
Illustration 3 g01228276
Typical Example
Note: The camshaft can be installed from either end of the engine.
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (B) into the ends of the camshaft. Install Tooling (C).Note: If, Tooling (A) was removed use the following Steps to install Tooling (A).
Install Tooling (B) into the engine until Tooling (B) is through the second camshaft bearing.
Slide Tooling (A) over Tooling (B).
Tighten the bolts for Tooling (A).
Remove Tooling (B).
Illustration 4 g06341519
Attach a suitable lifting device to the middle of camshaft (14). The weight of camshaft (14) on a C175-16 is approximately 77 kg (170 lb).The weight of camshaft (14) on a C175-20 is approximately 95 kg (210 lb). Install camshaft (14) halfway into the engine. Remove the suitable lifting device. Install camshaft (14). Use Tooling (C) to rotate camshaft (14). Rotate camshaft (14) to install camshaft (14).
Illustration 5 g06341503
Install cover assembly (13) and bolts (12).
Illustration 6 g06341495
Install retainer (11). Install the washers and bolts (10).
Illustration 7 g06094041
Rotate the engine so that the number one piston is at top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston". Install cam gear (9). Install spacer (8). Install bolt (7). Install bolts (6).
Illustration 8 g06094014
Install cover (5). Install bolts (4).
Illustration 9 g06093591
Install cover (2) and bolts (1). Connect harness assemblies (3).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".End By:
Install the valve lifters.
Install the turbochargers and supports.
Install the engine oil filter housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1
Illustration 1 g06341523
Install eight nuts (15).
Tighten eight nuts (15) to a torque of 55 10 N m (41 7 lb ft).
Illustration 2 g01228274
Typical Example
Illustration 3 g01228276
Typical Example
Note: The camshaft can be installed from either end of the engine.
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (B) into the ends of the camshaft. Install Tooling (C).Note: If, Tooling (A) was removed use the following Steps to install Tooling (A).
Install Tooling (B) into the engine until Tooling (B) is through the second camshaft bearing.
Slide Tooling (A) over Tooling (B).
Tighten the bolts for Tooling (A).
Remove Tooling (B).
Illustration 4 g06341519
Attach a suitable lifting device to the middle of camshaft (14). The weight of camshaft (14) on a C175-16 is approximately 77 kg (170 lb).The weight of camshaft (14) on a C175-20 is approximately 95 kg (210 lb). Install camshaft (14) halfway into the engine. Remove the suitable lifting device. Install camshaft (14). Use Tooling (C) to rotate camshaft (14). Rotate camshaft (14) to install camshaft (14).
Illustration 5 g06341503
Install cover assembly (13) and bolts (12).
Illustration 6 g06341495
Install retainer (11). Install the washers and bolts (10).
Illustration 7 g06094041
Rotate the engine so that the number one piston is at top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston". Install cam gear (9). Install spacer (8). Install bolt (7). Install bolts (6).
Illustration 8 g06094014
Install cover (5). Install bolts (4).
Illustration 9 g06093591
Install cover (2) and bolts (1). Connect harness assemblies (3).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".End By:
Install the valve lifters.
Install the turbochargers and supports.
Install the engine oil filter housing.
Caterpillar parts catalog:
Parts bezel Caterpillar catalog:
9B2974
BEZEL & GLASS ASSEM.
D315, D337
D315, D337
9B2974
BEZEL & GLASS ASSEM.
D315, D337
D315, D337
1005566
BEZEL
24H, 3406C, 3406E, 3412, 3412C, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 365B, 365B II, 365B L, 385B, 5090B, 5130, 5130B, 5230, 5230B, 533, 543, 627G, 637G, 784B, 785B, 789B, ...
24H, 3406C, 3406E, 3412, 3412C, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 365B, 365B II, 365B L, 385B, 5090B, 5130, 5130B, 5230, 5230B, 533, 543, 627G, 637G, 784B, 785B, 789B, ...
3126, 3126B, 3176B, 3176C, 3196, 3406E, 3408B, 3408E, 3412, 3412E, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C-10, C-12, C-15, C-16, C-9, C12, C32, C7, C9, TH48-E80
2289022
BEZEL
3116, 3126, 3208
3116, 3126, 3208
9C6252
BEZEL
215B, 215C, 215D, 229, 235B, 235C, 245
215B, 215C, 215D, 229, 235B, 235C, 245
6P8690
BEZEL
120G, 12G, 130G, 140G, 14G, 16G, 227, 245, 508, 613B, 613C, 615, 615C, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 814B, 815B, 826C, 950B, 955L, 966D, 980C, D10, D4E, D5B, D6D, D8L, D9L
120G, 12G, 130G, 140G, 14G, 16G, 227, 245, 508, 613B, 613C, 615, 615C, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 814B, 815B, 826C, 950B, 955L, 966D, 980C, D10, D4E, D5B, D6D, D8L, D9L
2422461
BEZEL
120M, 12M, 140M, 14M, 160M, 16M, 3126B, 637D, 770G, 770G OEM, 772G, 772G OEM, 773F, 775F, 777F, 938H, 950H, 962H, 966H, 972H, 980H, 988H, C7, C9, D6K LGP, IT38H, IT62H
120M, 12M, 140M, 14M, 160M, 16M, 3126B, 637D, 770G, 770G OEM, 772G, 772G OEM, 773F, 775F, 777F, 938H, 950H, 962H, 966H, 972H, 980H, 988H, C7, C9, D6K LGP, IT38H, IT62H
4205376
BEZEL
UPS 750
UPS 750
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 16M, 24H, 24M, 3508, 3508B, 3512B, 3516, 3516...
8F1809
BEZEL
D364
D364