3G8319 BIT-END Caterpillar parts
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
Rating:
Alternative (cross code) number:
CA3G8319
3G-8319
3G8319
CA3G8319
3G-8319
3G8319
Weight: 32 pounds 14 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
End Bit - Hot Cupped fits Caterpillar 3G8319
Parts ASAP Replaces Caterpillar Mfg Number(s) 3G8319 || Bolt Diameter: 0.75" || Length: 17" || Number of Holes: 6 || Thickness: 1"
Parts ASAP Replaces Caterpillar Mfg Number(s) 3G8319 || Bolt Diameter: 0.75" || Length: 17" || Number of Holes: 6 || Thickness: 1"
End Bit - Hot Cupped fits Caterpillar 3G8319
All States Replaces Caterpillar Mfg nos 3G8319 || Sub-Series: D6 Series || Length: 17" || Width: 9.5" || Thickness: 1"
All States Replaces Caterpillar Mfg nos 3G8319 || Sub-Series: D6 Series || Length: 17" || Width: 9.5" || Thickness: 1"
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 3G8319:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 9S-9082 Engine Turning Tool 1 Start By:
Remove the valve cover base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Turn OFF the fuel supply to the engine.
Illustration 1 g02031206
If necessary, remove tube assemblies (4).
Remove bolts (2), elbow (3), the gasket, and the O-ring seal.
Remove bolts (5), manifold (1), and the gaskets.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 9S-9082 Engine Turning Tool 1 Start By:
Remove the valve cover base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Turn OFF the fuel supply to the engine.
Illustration 1 g02031206
If necessary, remove tube assemblies (4).
Remove bolts (2), elbow (3), the gasket, and the O-ring seal.
Remove bolts (5), manifold (1), and the gaskets.
Caterpillar parts catalog:
Parts bit Caterpillar catalog:
7J2783
BIT & CUTTING EDGE GP
D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 XL
D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 XL
6A, 6S, D6D
6A, 6S, D6D
5S, 6A, 6S, D5B, D6D, D6E, D6E SR, D6G SR
6A, 6S, 814S, D5B, D6D, D6E, D6E SR, D6G SR
6A, 6S, 814S, D5B, D6D, D6E, D6E SR, D6G SR
527, D5B, D6E, D6E SR, D6G, D6G SR, D6G2 XL
527, D5B, D6E, D6E SR, D6G, D6G SR, D6G2 XL
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
2681114
BIT
D6G2 XL
D6G2 XL
2681115
BIT
D6G2 XL
D6G2 XL
527, D5B, D6E, D6E SR, D6G, D6G SR, D6G2 XL
527, D5B, D6E, D6E SR, D6G, D6G SR, D6G2 XL
6A, 6S, 814S, D5B, D6D, D6E, D6E SR, D6G SR
6A, 6S, 814S, D5B, D6D, D6E, D6E SR, D6G SR
D4H, D5H, D5HTSK II, D6M
D4E SR
4A, 4S, 930, D4E, D4E SR
5J6942
BIT-END
4A, 4S, 930, D4E, D4E SR
4A, 4S, 930, D4E, D4E SR
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5C, D5C III, D5G, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5C, D5C III, D5G, D5K LGP, D5K2 XL
D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL