4T0730 BIT & CUTTING EDGE GP Caterpillar parts
D5H
Rating:
Alternative (cross code) number:
CA4T0730
4T-0730
4T0730
CA4T0730
4T-0730
4T0730
TRACK-TYPE TRACTOR,
Compatible equipment models: 4T0730:
Information:
PARTS NEEDED
Qty
Part Number Description
1 3204797 TUBE AS
In Order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to Image1 below for reference during removal and installation of the seawater tube.
1. Remove the two hose clamps #1 from hose #2.
2. Remove two bolts and washers #3 from retaining flange.
3. Remove two bolts, nuts, washers and 2 piece clamp #4 from the tube assembly.
4. Remove the 243-3817 tube assembly #5 from the Aftercooler #8 and hose #2.
5. Remove the sleeve #6 from old tube assembly #5 (sleeve to be reused on installation of new tube assembly 320-4797).
6. Lubricate and install new O-Ring 6L1651 #7 onto new 320-4797 Tube As..
7. Reinstall sleeve item #5 (reused from old Tube As.) onto new 320-4797 Tube As.
8. Install new 320-4797 Tube As. into Aftercooler #8 and hose #2.
9. Reinstall two bolts, nuts, washers and 2 piece clamp #4 onto the new Tube assembly.
10. Reinstall two bolts and washers #3 into retaining flange.
11. Reinstall the two hose clamps #1 onto hose #2.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-1000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
1. Reasonable travel and mileage is covered up to $200 per vessel. Please note the sister engine serial number installed in the boat in the claim story as only one trip will be covered for a pair of engines in a vessel.
2. Maximum engine and engine room cleanup reimbursement is $1000 per vessel.
3. Replacement of other damaged components to be submitted as a policy claim through local Cat service Rep.
4. Must include additional documentation (invoice) for detailing engine and engine room in the claim submittal.
5. Only the parts listed in this program are allowed unless prior approval by local Cat Rep. for additional damage caused by seawater leak.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts bit Caterpillar catalog:
4T5504
BIT GP-END
D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
1U2210
BIT & CUTTING EDGE GP
D5H, D6M
D5H, D6M
4T2314
BIT & CUTTING EDGE GP
D5H, D5R LGP, D6M, D6N, D6N LGP
D5H, D5R LGP, D6M, D6N, D6N LGP
3G4210
BIT & CUTTING EDGE GP
D5H, D5HTSK II
D5H, D5HTSK II
8E9378
BIT-END
30/30, 517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, DEUCE
30/30, 517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, DEUCE
8E9379
BIT-END
30/30, 517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, DEUCE
30/30, 517, 527, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, DEUCE
4T5407
BIT-RH
527, D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
527, D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
4T5408
BIT-LH
527, D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
527, D4H, D4H XL, D5H, D5H XL, D5M, D5N, D6M, D6N
3G4285
BIT-END
D4H, D5H, D5HTSK II, D6M
D4H, D5H, D5HTSK II, D6M
1U0594
BIT & CUTTING EDGE GP
973, 973C
973, 973C
9J1883
BIT GP-END
7A, 7S, 834B, 8A, 8U, D7G
7A, 7S, 834B, 8A, 8U, D7G
6J5471
BIT GP-END
7A, 7S, D7G, D7G2
7A, 7S, D7G, D7G2
1073428
BIT GP
14H, 14H NA, 160H NA, 163H NA
14H, 14H NA, 160H NA, 163H NA
9J4370
BIT & CUTTING EDGE GP
631D, 631E, 631G, 637D, 637E, 637G
631D, 631E, 631G, 637D, 637E, 637G
1955117
BIT-END
D11R, D11T
D11R, D11T
7D6671
BIT GP-END
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 143H, 160G
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 143H, 160G