BIT AS-CUTTER 5435470 - Caterpillar

Removal Procedure
Start By:
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02926996
Use a suitable method in order to prevent the crankshaft from rotating.
Remove bolts (1) from crankshaft pulley (2).
If equipped, remove crankshaft V-pulley (2).
Remove crankshaft multi V-pulley (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are free from wear and damage.
Illustration 2 g02926996
Install crankshaft multi V-pulley (3) onto the crankshaft.
If equipped, install crankshaft V-pulley (2).
Install bolts (1) to the crankshaft pulley. Tighten the bolts to a torque of 45 N m (33 lb ft) Note: Use a suitable method in order to prevent the crankshaft from rotating when torquing the bolts.End By:
Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.