BIT-END-LH 8E4544 - Caterpillar

8E4544 BIT-END-LH Caterpillar parts D11N, D11R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8E4544
8E-4544
8E4544

Weight: 364 pounds 165 kg.

Buy BIT-END-LH 8E4544 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

CTP 8E4544 End Bit for Bulldozers/Compactors, High Productivity, Right Hand

$473.42

28 Jun 2022

Amazon.com

CTP 8E4544 End Bit for Bulldozers/Compactors, High Productivity, Right Hand
CTP For Bulldozers/Compactors || High Productivity || Right Hand

$797.79

26 Oct 2018

CATERPILLAR AFTERMARKET: CATERPILLAR AFT

Caterpillar BIT END 8E4544 New

$674.20

30 Nov 2018
37000 Hundredths Pounds
COSTEX: COSTEX

New CAT Aftermarket End Bit 8E4544
Undercarriage Parts

Show more prices Caterpillar parts

Number on catalog scheme: 2

Caterpillar 8E4544 Parts scheme BIT-END-LH

For full view, you need register

8E4544 Images:

Compatible equipment models: 8E4544:

TRACK-TYPE TRACTOR D11N D11R Caterpillar

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on wires and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01318612
Typical example
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Disconnect plastic tube assemblies (4) and (5) from fuel priming pump (3).
Disconnect plastic tube assemblies (4) and (5) from fuel priming pump (3).
Disconnect plastic tube assembly (2) from fuel priming pump (3).
Plug all the connections on fuel priming pump (3) and plastic tube assemblies (4) and (5).
Disconnect the harness assembly from fuel priming pump (3).
Support the fuel priming pump. Remove bolts and washers (1) and remove fuel priming pump (3). Note: Note the location and the orientation of the brackets for the tube assemblies.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01318612
Typical example
Ensure that the fuel priming pump is clean and free from wear or damage. If necessary, replace the fuel priming pump as a complete assembly.
Position fuel priming pump (3) onto the cylinder head. Install bolts and washers (1). Ensure that any brackets that are retained by the bolts are installed in the correct position. Tighten the bolts to a torque on 9 N m (80 lb in).
Remove all plugs from the fuel priming pump and from the plastic tube assemblies. Connect plastic tube assemblies (4) and (5) to fuel priming pump (3).
Connect plastic tube assembly (2) to fuel priming pump (3).
Install the harness assembly to fuel priming pump (3).
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Remove the air from the fuel system. Refer to Operations and Maintenance Manual, "Fuel System - Prime".