BIT-END-LH 8E9748 - Caterpillar

If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Work Lights (18)
Illustration 13 g02117589
Light Switch - Push switch (18) in order to turn on the work lights. Whenever you push the switch, you change the pattern of the work lights that are turned on. The indicator lights in the cab indicate the pattern of the work lights. Pattern 1 - When you press the light switch once, the left indicator light turns on. When the left indicator light is on, the following work lights are turned on: work lights (18A) , which are mounted on the front of the machine, and work lights (18B) , which are mounted on the cab.Pattern 2 - When you press the light switch twice, the left indicator light and the right indicator light turn on. When the left indicator light and the right indicator lights are on, the following work lights are turned on: work lights (18A) , which are mounted on the front of the machine,, work lights (18B) , which are mounted on the cab, and work lights (18C) , which are mounted on the stick.OFF - When both of the indicator lights are off, all of the work lights are off.Note: Your machine may be equipped with a lighting system that has a time delay. When this system is installed, work lights (18B) and work lights (18C) will not turn off for a predetermined amount of time after the engine start key has been turned to the OFF position. The time delay can vary from 0 seconds to 90 seconds. For further details, consult your Cat dealer.Rear View Camera (19)
Rear View Camera - If equipped, push this switch in order to toggle the images that are shown on the monitor in the cab. For more information, refer to Operation and Maintenance Manual, "Monitoring System". Fine Swing Control (20)
The fine swing control switch is on the right side instrument panel.
Fine Swing Control - Push down on the top of the switch in order to activate the fine swing control. This improves swing control during deceleration of a swing. When the fine swing control is ON, the swing parking brake is released. Swing control improves during deceleration of a swing because the swing is allowed to drift instead of stopping abruptly. Push down on the bottom of the switch in order to turn off the fine swing control. Operate the machine with the fine swing control in the OFF position when the machine is on a slope. Operate the machine with the fine swing control in the OFF position when great swing forces are required. For example, digging on a sidewall requires great swing force. Operate the machine with the fine swing control in the OFF position in order to control the motion with the swing brake.Cab Riser Lights (21)
Illustration 14 g02117590
Light switch - Push down on the top of switch (21) in order to turn on the lights on