BIT-END 9D4881 - Caterpillar

9D4881 BIT-END Caterpillar parts 14G, 16G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9D4881
9D-4881
9D4881

Weight: 20 pounds 9 kg.

Buy BIT-END 9D4881 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Show more prices Caterpillar parts

Compatible equipment models: 9D4881:

MOTOR GRADER 14G 16G Caterpillar

Number on catalog scheme: 2

For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Before you remove the air intake shutoff, pull the trip knob on the air intake shutoff or press the emergency stop button in order to release the blade latch. If the blade latch is released after the air intake shutoff is removed, serious personal injury can result.
Manually release the air shutoff. Pull or press in order to release the knob on the air shutoff. Ensure that the indicator on the air shutoff points straight to the "CLOSED" position. If the air shutoff did not trip, refer to Troubleshooting, "Air Shutoff System".
Illustration 1 g02255535
Disconnect harness assemblies (5), (6), and (7).
Disconnect tube assembly (3) from air shutoff (2).
Loosen the hose clamp and disconnect hose (4).
Remove nuts (1) that mount air shutoff (2) to the air cleaner.
Remove air shutoff (2) and the gasket. Note: Inspect the lines of the air intake for debris.
Repeat for the other air shutoff. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02255535
Install a new gasket and air shutoff (2) on the air cleaner. Install nuts (1).
Connect hose (4) and tighten the hose clamp.
Connect tube assembly (3) to air shutoff (2).
Connect harness assemblies (7), (6), and (5).
Reset the indicator on the air shutoff. Ensure that the arrow on the indicator is pointing straight to the "OPEN" position.
Test air shutoff (2) for proper operation and refer to Operation and Maintenance Manual, "Air Shutoff".
Repeat for the other air shutoff.

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

14G MOTOR GRADER 96U01098-04297 (MACHINE) POWERED BY 3306 ENGINE

9D-2160: EDGE GP-CUTTING » END BIT SEBP10770847
9D-2170: EDGE GP-CUTTING » END BIT SEBP10770848

14G MOTOR GRADER 96U04298-07045 (MACHINE) POWERED BY 3306 ENGINE

CUTTING EDGE REPLACEMENTS-FIELD INSTALLATION » END BIT SEBP12630912
CUTTING EDGE REPLACEMENTS-FIELD INSTALLATION » END BIT SEBP12630912

16G Motor Grader 93U02679-UP (MACHINE) POWERED BY 3406 Engine

6G-4830: BLADE GP » (MOLDBOARD) SEBP17150650

14G MOTOR GRADER 96U00001-01097 (MACHINE)

9D-2160: EDGE GP-CUTTING » UEG0783S0377
9D-2170: EDGE GP-CUTTING » UEG0783S0378

Parts bit Caterpillar catalog:

1055183 BIT AS
120G, 120H, 120H ES, 120H NA, 120M, 12G, 12M, 130G, 135H, 135H NA, 140G, 140M, 14M, 160M, 160M 2, 16G, 16M

9J4406 BIT
14G, 16G

9J4405 BIT
14G, 16G

6Y6824 BIT AS
120G, 12G, 130G, 140G, 16G

1055185 BIT
120G, 120H, 120H ES, 120M, 12G, 12M, 130G, 135H, 140G, 140M, 160M, 16G

8E5529 BIT-END
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H NA, 14M, 160H, 160H ES, 160H NA, 160K, 160M, ...

6Y2805 BIT-END
120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14H NA, 14M, 160H, 160H ES, 160H NA, 160K, 1...