BLADE 1C4124 - Caterpillar

1. Use Tool (A) to remove oil filter (3) from oil filter base assembly (2). Upon installation, follow the instructions on the oil filter for the correct installation procedure.2. Remove four bolts (1).3. Remove oil filter base assembly (2).4. Check the gasket between the oil filter base and the adapter for wear or damage. Replace with a new part if necessary. For installation of the oil filter & base, reverse the removal steps. 5. Check the engine oil level. See the Operation & Maintenance Manual.Disassemble & Assemble Oil Filter Base 1306-017
Start By:a. remove oil filter base 1. Remove bolts (1) and cover (2) from oil filter base. 2. Remove spring (3) and valve (4) from oil filter base. 3. Remove bolts (5) and cover (6). 4. Remove gasket (7) and replace if necessary. For assembly of the oil filter base, reverse the disassembly steps. End By:a. install oil filter base