BLADE-SAW 2566618 - Caterpillar

1. Loosen nut (1) to release tension from belt (4). Remove bolt (2), washer and nut holding adjusting block (5) to the air conditioning compressor (3). 2. Remove bolt (6) nut and washers. Remove belt (4) from air conditioning compressor (3) and position the air conditioning compressor (3) out of the way. 3. Remove two bolts (8) connecting the upper fan guard (7) and the lower fan guard (9). Remove eight bolts (10) and washers and remove both guards.4. Remove belt (4) by moving the belt around the fan blade and off of the engine. Install the belt in reverse order. Adjust nut (1) to obtain the proper tension. Consult the Operation & Maintenance Manual for proper belt tightening specifications.End By:a. install left engine panel assemblyb. install right engine panel assemblyRemove & Install Air Conditioning Fans And Motors
1. Remove four bolts (2) and remove guard (1). 2. Loosen setscrew (3) and remove fan (4). 3. Disconnect wiring connector (7).4. Remove two nuts (6) and washers. Remove one clip (8), and remove motor (5).5. Use the same procedure to remove the other fan and motor. Install in reverse order.