BLADE & EDGE GP-ANGLING 4756124 - Caterpillar

1. Remove screws (1) and cover (2) from the machine. 2. Remove knob (3), guide (4), the seal and the spring from the control panel. 3. Remove bolts (7), bearing (6) and lever assembly (5) from the control panel. Bearing (6) is free to fall after bolts (7) are removed.4. Remove bearing (6), bearing (8), bearing (10), bolts (11) and shaft (9) from the lever assembly.Install Tip Hydraulic Hand Control (814)
1. Install shaft (5) on lever (6) with bolts (4).2. Install bearing (3) and bearing (2) on shaft (5). 3. Install lever assembly (6) in the control panel.4. Install bearing (1) on shaft (5).5. Make an alignment of plate (8) and shaft (5) and install bolts (7). 6. Install spring (9), seal (10), guide and the knob on the lever assembly. 7. Install plate (11) on the control panel.