AVSPARE.COM
parts catalog

BLADE AS-UNIVERSAL 4Z9115 - Caterpillar



4Z9115 BLADE AS-UNIVERSAL Caterpillar parts D8R, D8R II BLADE
Rating:
14
Alternative (cross code) number:
CA4Z9115
4Z-9115
4Z9115
Caterpillar 4Z9115 BLADE AS-UNIVERSAL

Buy BLADE AS-UNIVERSAL 4Z9115 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z9115:

TRACK-TYPE TRACTOR  D8R   D8R II   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     Test Gauge Hose    
6V-4143 Coupler (1)     1    
177-7860 Hose Assembly (1)     1    
8T-4188 Union Adapter (1)     1    
6V-3966 Fitting (1)     1    
B     Test Gauge    
8T-0861 (2) Pressure Gauge (1)     1    
6V-4144 Coupler (1)     1    
( 2 ) The 198-4240 Digital Pressure Indicator is also available.The test and adjustment for the pressure reducing valve (lowering control) ensures that the machine has the correct pilot pressure that is required to lower the lift linkage on a machine with a dead engine.Preparation for Troubleshooting
Park the machine on a smooth, level surface. Ensure that the machine is away from any operating machines.
Permit only one operator on the machine. Keep other personnel away from the machine or in sight of the operator.
Lower the bucket and/or attachment to the ground.
Place the switch (hydraulic lockout) in the UNLOCKED position. Cycle the control levers through all positions in order to release the pressure in the implement hydraulic system.
Turn the engine start switch to the OFF position.
Relieve the pressure in the hydraulic tank.ReferenceFor additional information about relieving the pressure in the hydraulic system, refer to the Service Manual module Testing and Adjusting, "System Pressure - Release" for the machine that is being serviced.
Install the steering frame lock.
Engage the parking brake. Place blocks in front of the wheels and in back of the wheels.Testing the Pressure Relief Valve (Lowering Control)
Illustration 1 g02027336
Main control valve (Left side view) (1) Pressure reducing valve (2) Pressure tap
Connect Tooling (A) and (B) . Connect Tooling (A) to pressure tap (2) .
Start the engine and warm the hydraulic oil to normal operating temperature.
Raise the lift linkage to the mid-travel position and return the lift control lever to the HOLD position. Turn the engine start switch to the OFF position.
Lower the lift linkage. Observe the pilot pressure on the pressure gauge during travel. The pilot pressure setting should be 1580 300 kPa (230 45 psi).
If the pressure setting for the pilot pressure is correct, turn the key start switch to the ON position and lower the lift linkage to the ground. If the pressure setting for the pilot pressure is not correct, proceed to Section"Adjusting the Pressure Reducing Valve (Lowering Control)".
Release the pressure in the implement hydraulic system.
Remove Tooling (A, B) from the main control valve.Adjusting the Pressure Reducing Valve (Lowering Control)
Illustration 2 g02027356
Location of the pressure reducing valve (lowering control) (3) Adjustment

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D8R Custom Parts Manual Track-Type Tractor 7XM00001-UP (MACHINE) POWERED BY 3406 Engine
D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE)


Parts blade Caterpillar catalog:

6V5849 BLADE AS-WIPER
120H, 120H ES, 120H NA, 120M, 120M 2, 12H, 12H ES, 12H NA, 12M, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140M, 140M 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H, 163H NA, 16H, ...
1258175 BLADE AS-WIPER
65C, 75C, 75D, 85C, 85D, 953C, 963C, 973C, D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D5N, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, D6R, D6R II, D6R III, D...
6V5851 BLADE AS-WIPER
120G, 120M, 120M 2, 12G, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16M, 24H, 24M, 525B, 535B, 545, 583T, 587R, 587T, ...
1466433 BLADE AS-WIPER
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 29...
6V5853 BLADE AS-WIPER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.