AVSPARE.COM
parts catalog

BLADE AS-UNIVERSAL 4Z9194 - Caterpillar



4Z9194 BLADE AS-UNIVERSAL Caterpillar parts D8R, D8R II BLADE
Rating:
40
Alternative (cross code) number:
CA4Z9194
4Z-9194
4Z9194
Caterpillar 4Z9194 BLADE AS-UNIVERSAL

Buy BLADE AS-UNIVERSAL 4Z9194 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z9194:

TRACK-TYPE TRACTOR  D8R   D8R II   Caterpillar
  For full view, you need register

Information:


Do not use threaded rods that have not been hardened as tooling with hydraulic cylinders. The maximum rated tonnage should be stamped on one end of the puller studs. Do not use threaded rods that have not been stamped with the rated tonnage.
Illustration 1 g00897576
Attach a suitable lifting device to boom (5), as shown. The weight range of the boom and the stick cylinder is approximately 1500 kg (3300 lb) to 3100 kg (6850 lb). Note: Apply a thin coat of Tooling (C) to the bores in the upper frame and in the bore for the boom foot pin. Apply a thin coat of Tooling (C) to the lip of lip type seals.
Position boom (5) into the correct position. Make sure that the pin bores in the upper frame align with the pin bore in the boom.
Illustration 2 g00897479Note: Apply a thin coat of Tooling (C) to the boom foot pin.
Install Tooling (B) in boom foot pin assembly (8). Use Tooling (B) to temporarily install boom foot pin assembly (8) in the upper frame and in the boom. Remove Tooling (B).
Illustration 3 g00897464
(X) Upper Frame
(Y) Boom
(Z) Boom Foot Pin
Measure the total clearance between the boom and the upper frame at the bore for the boom foot pin. The total clearance of Dimension (a) plus Dimension (b) must not be more than 1.0 mm (0.04 inch). If the total clearance is less than 1.0 mm (0.04 inch), the addition of shims between the boom and the upper frame will not be required. If the total clearance is more than 1.0 mm (0.04 inch), add the correct thickness of shims in order to obtain the required clearance.
Use the following table to determine the correct shims (9).
Table 2
Table for Shims (9)
Shim Thickness (mm)
166-1487 2.0(1)
113-2127 0.5
093-0084 1.0
093-0116 2.0
(1) This shim is required to be used. This shim must be next to the boom.
Illustration 4 g00897580
If shims (9) need to be installed between the boom and the upper frame attach Tooling (A) to boom foot pin assembly (8), as shown. Use Tooling (A) to remove boom foot pin assembly (8).
Install the correct amount of shims (9).
Illustration 5 g00897479
Apply Tooling (C) to the boom foot pin.
Install Tooling (B) in boom foot pin (8). Use Tooling (B) to install boom foot pin assembly (8) in the upper frame and in the boom. Remove Tooling (B).
Illustration 6 g00897581
Install the washer and bolt (7). Tighten the bolt to a torque of 460 60 N m (340 44 lb ft).
Remove the suitable lifting device from the boom at this time.
Illustration 7 g00897582
Connect hose assemblies (6).
Illustration 8 g00897072
Position step (4).
Install bolts (3).
Illustration 9 g00897075
Position cover (2).
Install bolts (1). End By:
Connect the rod end of the boom cylinders. Refer to Disassembly and Assembly, "Boom Cylinder - Remove and Install".
Install the stick. Refer to Disassembly and Assembly, "Stick - Install".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D8R Custom Parts Manual Track-Type Tractor 7XM00001-UP (MACHINE) POWERED BY 3406 Engine
D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE)


Parts blade Caterpillar catalog:

6V5849 BLADE AS-WIPER
120H, 120H ES, 120H NA, 120M, 120M 2, 12H, 12H ES, 12H NA, 12M, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140M, 140M 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H, 163H NA, 16H, ...
1258175 BLADE AS-WIPER
65C, 75C, 75D, 85C, 85D, 953C, 963C, 973C, D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D5N, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, D6R, D6R II, D6R III, D...
6V5851 BLADE AS-WIPER
120G, 120M, 120M 2, 12G, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16M, 24H, 24M, 525B, 535B, 545, 583T, 587R, 587T, ...
1466433 BLADE AS-WIPER
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 29...
6V5853 BLADE AS-WIPER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.