BLADE GP-RVSBL 5246849 - Caterpillar

Illustration 1 g00674298
Vibratory On/Off Control
Some machines are equipped with a lockout for the vibratory system. The lockout will prevent the operator from starting the vibratory system when the machine is in the HIGH propel range. When the machine is equipped with the lockout, place the propel speed range control into the LOW propel range.Switch (1) on the propel lever controls the operation of the vibration system.ON - In order to turn on the vibration system, press switch (1) .OFF - In order to stop the vibration system, press switch (1) again.Note: In order to start the vibratory system, the engine must be running at high idle.Note: In order to start the vibratory system, the vibratory amplitude control must be set to high amplitude or low amplitude. The amplitude must be set before the vibratory system can be started with the vibratory control.Vibratory Amplitude Control
Illustration 2 g00674298
Note: Machines that are equipped with the lockout for the vibratory system must be set to the LOW range in order to start the vibratory system.The vibratory amplitude control is located on the operator console to the right of the seat. The control is used to select one of three settings: low amplitude, high amplitude and off
LOW - To achieve LOW amplitude, rock vibratory control (2) forward. OFF - To stop the vibration system, rock vibratory control (2) to the CENTER position.
HIGH - To achieve HIGH amplitude, rock vibratory control (2) rearward. Vibratory Control (If Equipped)
Illustration 3 g00673313
The variable vibration control knob is used to vary the frequency of the drum vibration. Rotate the knob in a clockwise direction in order to increase the drum vibration. Rotate the knob in a counterclockwise direction in order to reduce the frequency of the drum vibration. The drum vibration can be varied from 1400 to 1915 vibrations per minute (VPM).