BLADE AS-ANGLING 5298397 - Caterpillar

ACTION REQUIRED
The 284-0612 Tube As should be replaced with the 312-5562 Hose As and two 184-7211 Clips. Also, replace the 0T-0573 Bolts with two 0S-1619 Bolts. The hose must be retained at location (1) and location (2).
Replace the 008-8381 Elbow and 6V-5053 O-ring Seal with new parts of the same part number.
If the 312-5562 Hose As is being retrofitted to Group 1 (RNC00001-RNC02939), the indicated oil line tube (3) must be updated to a 309-6233 Tube. A 6V-4589 O-Ring Seal and 9M-4584 Flared Connector are used at the lower connection of this tube. A 198-6068 Seal is used at the upper connection.
Refer to Engine News articles SEBD9508 and SEBD9503 for additional information.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-5000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 3.0-hour job for Group 1
Reasonable travel and mileage are allowed. Travel can only be claimed for one engine in a two-engine installation. Both engines must be called out in claim report.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-5000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 3.0-hour job for Group 2
Reasonable travel and mileage are allowed. Travel can only be claimed for one engine in a two-engine installation. Both engines must be called out in claim report.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.