BLADE-SCRAPER 6R2992 - Caterpillar

you road a machine, consult your tire dealer for recommended tire pressures and for speed limitations.Before you road the machine, place the front wheels in the vertical position. Also, install the hydraulic control lock group on the implement control levers. Installing the hydraulic control lock group will prevent the hydraulic controls from being activated during roading.All blades and attached equipment should be in their transport position and positioned so that they are within the defined transport width.Limitations for TON-kilometer per hour (TON-mile per hour) must be obeyed. Consult your tire dealer for the speed limit of the tires that are used.When you travel for long distances, schedule stops in order to allow the tires and the components to cool. Stop for 30 minutes after every 40 km (25 mi) or after every hour.Inflate the tires to the correct pressure.Use a self-attaching inflation chuck and stand behind the tire tread during the tire inflation. See the section in Operation and Maintenance Manual, "Tire Inflation Information" for more information.Perform a walk-around inspection and measure the fluid levels in the various compartments.Check with the proper officials in order to obtain the required licenses and authorization.Travel at a moderate speed. Observe all speed limitations when you road the machine.