BLADE & TIP AR-POWER 8W2512 - Caterpillar

*The Operation And Maintenance Manual willneed to be replaced. These manuals are available in multiple languages.Replacement manuals should be ordered using the media number found in thetop, right hand corner of the manual and will be in the form of S_BU7732-03or S_BU7731-02. To order a replacement manual, contact Media Logisticsat 1-800-566-7782. When ordering the Operation and MaintenanceManuals, manual S_BU7732-03 needs to be revision 3 or higher and manualS_BU7731-02 needs to be revision 2 or higher.ACTION REQUIRED
***** Parts Stock *****Remove all 235-5243 (change 00 and 01), 237-5332(change 00), 235-5246 (change 00), 233-5737 (change 00, 01, and 02), 233-5735(change 00), and 233-5736 (change 00) FILMS from parts stock.***** Affected Product *****See the attached Rework Procedure.SERVICE CLAIM ALLOWANCES
***** Parts Stock *****Submit one claim for all 235-5243 (change 00and 01), 237-5332 (change 00), 235-5246 (change 00), 233-5737 (change 00,01, and 02), 233-5735 (change 00), and 233-5736 (change 00) FILMS removedfrom parts stock.***** Affected Product *****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs
0-2000
0-24 mos 100% 1.0 0 0 0 0
This is a 1.0?hr job.PARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.Attach. (1-Rework Procedure)Rework Procedure
To ensure that the machine?s hydraulic functionsmatch the descriptions in the Operation and Maintenance Manual, the followingsteps should be taken.
Enter the machine and sit in the operator?s seat.Examine the joystick controls in the machine. Identify the joystick handleconfiguration on your machine and the corresponding former decal graphicshown in Illustrations 1 and 2 or Illustrations 3 and 4. Views are referencedas if the operator is sitting in the seat.
Caterpillar Control Pattern - Right Hand Control
Illustration 1Caterpillar Control Pattern - Left Hand Control
Illustration 2Alternate Control PatternDedicated Dual Directional Control Pattern ? Right Hand Control
Illustration 3Dedicated Dual Directional Control Pattern ? Left Hand Control
Illustration 4
Order the appropriate "new" decals that matchthe machine?s joystick configuration. Reference to Illustrations 1 and2 or to Illustrations 3 and 4. Note that the 233-5734 and 237-5331 decalsfor the left hand control do not need to be replaced.
Remove the existing joystick control decals. Besure to clean the surface before installing the replacement decals. A 50:50mixture of water and isopropyl alcohol or a solution of clean water andliquid soap (1-3 drops of soap per liter of water) should be an adequatecleaning agent.
Machines equipped with side windowswill require the lower side windows to be removed in order to access thedecals. Reference the Operation and Maintenance Manual, "Maintenance Section,Windows-Clean".
Install the appropriate replacement decals inthe operator compartment.
Locate the Operation and Maintenance Manual storagebox. Remove the manual from the storage box.
Illustration 5
Cut the 5P-7957 lanyard just behind the 5P-7958sleeve. See Illustration 5.
Remove the Operation and Maintenance Manual [S_BU7731(SSL) or S_BU7732 (MTL)] and discard.
Install replacement Operation and MaintenanceManual, S_BU7731-02 (SSL) or S_BU7732-03 (MTL),or later manual revision levels as appropriate.
Secure the new manual using the existing lanyardand new 5P-7958 sleeve. See Illustration 5.
10) Locate the machine Data Link connector locatedin the operator compartment.11) Reflash the Auxiliary Hydraulic ECM. Machineconfigurations should be set using Electronic Technician (ET) version 2004Band the 258-6532 software. Reference RENR6418, "Testing and Adjusting ofAuxiliary Hydraulic Electronic Control System".12) This step is only