BLOCK SUPPORT (WELD ON ITEM) 0844243 - Caterpillar

Illustration 1 g03396922
Table 1
Specification for 372-7160 Oscillating Axle Gp
Item Qty Part Specification Description
1 - - Surfaces must be free of burrs before assembly.
Before assembly, apply 8C-8422 Sealant to the mating surfaces.
2 3 9M-6097 O-Ring Seal Lubricate lightly with lubricant that being sealed.
3 2 220-6043 Bushing Bore before assembly is 305.790 0.010 mm (12.0390 0.0004 inch).
Before assembly, apply black 5P-0960 Grease Cartridge to the surfaces.
4 54 160-8510 Self-Locking Bolt Torque to 210 40 N m (155 30 lb ft).
Tighten to additional turn of 120 5 degrees.
5 2 5S-0085 Thrust Bearing Before assembly, apply black 5P-0960 Grease Cartridge to the surfaces.
6 2 1K-6853 Grease Fitting Before assembly, apply white Loctite Low Breakloose PST to the threads.
7 2 164-4180 Plug As Torque to 210 20 N m (155 15 lb ft).
8 1 165-4929 Plug As Torque to 210 20 N m (155 15 lb ft).
9 4 6M-1622 Dowel Protrusion (E) is 55.7 1.5 mm (2.19 0.06 inch).
10 50 173-9684 Bolt Torque to 1000 125 N m (738 92 lb ft).