BLOCK 0974228 - Caterpillar

Table 1
Sales Model Adaptable to Machines Effective in Production with Machines
D11T (S/N: AMA1-604) (S/N: AMA605-UP)
(S/N: MDG1-179) (S/N: MDG180-UP)
(S/N: JEL1-401) (S/N: JEL402-UP)
(S/N: JNS1-134) (S/N: JNS135-UP)
Illustration 1 g03883535
Updated D11T position sensor hardware.
Note: Machines equipped with the new position sensors can be identified by the cable assembly shown in Illustration 1.For a complete list of material and the correct procedure required to install the sensor hardware and implement software, refer to Special Instruction, REHS9892, "Installation Procedure For The Sensor On Certain D11T Track-Type Tractor Position Sensing Lift Cylinders". This special instruction is available on the Caterpillar Service Information System (SIS) and through the normal literature distribution system at your local Cat ® dealer.Note: The quantities used in Special Instruction, REHS9892, "Installation Procedure For The Sensor On Certain D11T Track-Type Tractor Position Sensing Lift Cylinders" reflect the parts required per lift position sensor. Machines equipped with autocarry will only require one lift position sensor to be updated while carrydozers will require two.