BLOCK 0A2604 - Caterpillar

Illustration 1 g01156358
(1) Control Panel (2) Stick (3) Stabilizer (4) Boom (5) Bucket
Table 1
BH27 BACKHOE
Europe Only    
Approximate weight of backhoe without a bucket     785 kg (1731 lb)    
Maximum length of backhoe    
3.7 m (12 ft)    
Maximum depth    
2.7 m (8.8 ft)    
Dump Clearance    
2.8 m (9 ft)    
Maximum Angle of swing     180 degrees    
Width of backhoe    
1577 mm (62 inch)    
Table 2
BH30 BACKHOE    
Approximate weight of backhoe without a bucket    
795 kg (1753 lb)    
Maximum length of backhoe    
3.7 m (12.1 ft)    
Maximum depth    
2.9 m (9.5 ft)    
Dump Clearance    
2.7 m (8.8 ft)    
Maximum angle of swing     180 degrees    
Width of backhoe    
1577 mm (62 inch)    
Table 3
BH30 w BACKHOE    
Approximate weight of backhoe without a bucket    
815 kg (1797 lb)    
Maximum length of backhoe    
3.7 m (12.3 ft)    
Maximum depth    
2.9 m (9.5 ft)    
Dump Clearance    
3.00 m (9.8 ft)    
Maximum angle of swing     180 degrees    
Width of backhoe    
1720 mm (67.7 inch)    Rated Loads
Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.
Note: Rated loads should be used as a guide. Uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.Rated loads are based upon a standard machine with the following conditions:
lubricants
full fuel tank
75 kg (165 lb) operatorThe rated operating load is defined by the SAE standard "J818" (May 1987) and by the ISO 5998 ( 1986) as no more than 50% of the static tipping load.The rated loads were calculated with a machine that was equipped with a 190-7391 General Purpose Bucket . If a different work tool is used, the rated load will vary by the difference in weight between the work tool and the 190-7391 General Purpose Bucket . If the 169-5725 Quick Coupler is used, adjust the rated loads by 26 kg (57 lb).The following table provides the rated operating loads for the standard machine configuration with a bucket.
Illustration 2 g00869256
The lift point radius (A)
Table 4
The Rated Operating Load with the Backhoe in a straight forward position or articulated 90 degrees    
Lift Point Radius     BH27, BH30, and BH30 w    
1.5 m (4.9 ft)    
1000 kg (2204 lb)    
2 m (6.6 ft)    
800 kg (1763 lb)    
2.5 m (8.2 ft)    
600 kg (1322 lb)    
3 m (9.8 ft)    
450 kg (992 lb)    Intended Use
Backhoes are used in typical backhoe applications such as digging footings, basements, drainage ditches, utility trenching, backfilling, and maintaining slopes and embankments in construction, industrial, and landscape settings. Backhoes are also ideal for demolishing concrete when