BLOCK 1323496 - Caterpillar

Color Multi Purpose Display
Illustration 1 g03796429
(1) Color Multi Purpose Display (CMPD)
(2) Navigation button
(3) OK button
(4) BACK button
(5) Menu button
(6) Brightness buttonNavigation Button (2)
Up
The Up navigation button can be used for the following functions:
Navigating a menu list in the upward direction
Scrolling a highlighted letter in a letter entry screen Up
Scrolling a highlighted number in a number entry screen Up
Navigating to the previous performance pageRight
The right navigation button can be used for the following functions:
Highlighting the next letter in an entry screen
Highlighting the next number in an entry screen
Increase an adjustable value
Scrolling through popups when more than one popup is activeDown
The down navigation button can be used for the following functions:
Navigating a list in the downward direction
Scrolling a highlighted letter in an entry screen
Scrolling a highlighted number in an entry screenLeft
The left navigation button can be used for the following functions:
Highlighting the previous letter in an entry screen
Highlighting the previous number in an entry screen
Decreasing an adjustable valueOK Button (3)
The OK button can be used for the following functions:
Selecting a highlighted item
Confirming an action when a popup is visible
Snoozing a warning or information popupBACK Button (4)
The BACK button can be used for the following functions:
Navigating to the previous screen
Canceling an action when a popup is visibleMenu Button (5)
The menu button can be used for the following functions:
Navigate to main menu screen from anywhere in the menu structure.
If the Main Menu is visible, the menu button will return to performance pages.Brightness Button (6)
The brightness button can be used for the following functions:
Press and Release: Displays brightness popup (if not already visible).
Press and Release: When popup is visible, the brightness button will increase or decrease the brightness level.
If the brightness button is pressed and held for 3 seconds, the display will toggle between day mode and night mode.Popups
Confirmation
The confirmation popup will allow the operator to confirm or cancel the selection.Brightness
When the user presses the brightness button, the button release will trigger the brightness popup. While this popup is shown, pressing the brightness button will decrease the brightness level. Pressing the left or right buttons while this popup is shown will cause the brightness level to decrease or increase accordingly. If the brightness level is decreased when the brightness level is zero, the level will wrap around to 100%. If the brightness level is increased when the brightness level is 100%, the level will wrap around to zero.Info Popups
Info popups will provide non-safety-critical messages to the operator.Warning Popups
Introduction to warning popups
When a malfunction exists in one or more of the machine's components or subsystems, corresponding diagnostic fault and/or event pop-ups will be displayed to alert the operator.The operator may press the OK button to snooze the pop-up for 8 hours or until the machine is turned off and started again. Diagnostic faults and events should be addressed according to Warning Level discussed in the following section.Explanations for any pop-ups can be viewed in the "Diagnostics" section of the "Service" menu which is discussed later in this document. The OK button clears all popups except