BLOCK 1381726 - Caterpillar

Required Parts
Table 4
Required Parts    
Part Number     Part Description     Qty    
100-4458     Bolt     1    
353-3588     Fuel Filter As     1    
354-5556     Bracket As     1    
355-1582     Tube As     1    
356-4028     Fuel Connection     1    
439-8115     Fuel Line     1    
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training. Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, General Hazard Information and High Pressure Fuel Lines for safety information. Refer to System Operation, Testing and Adjusting, Cleanliness of Fuel System Components for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Illustration 10 g03646163
Typical example
Remove the plug from the fuel injection pump. Install 356-4028 Fuel Connection (2) into the fuel injection pump. Tighten the fuel connection (2) to a torque of 30 N m (22 lb ft).
Install the new 439-8115 Fuel Line (1) to the fuel connection. Orientate the tube assembly such that the fourth leg at Position (X) is vertical. Refer to illustration 10. Tighten the nut finger tight.
Illustration 11 g03646171
Typical example
Position 354-5556 Bracket As (4) onto the cover of the inlet manifold.
Install 6I-0260 Bolts (3) to the bracket (4). Tighten the bolts to a torque of 22 N m (195 lb in).
Illustration 12 g03645420
Typical example
Position the 311-1737 Bracket As (5) onto bracket (4) .
Install nuts (6). Tighten the nuts to a torque