BLOCK 1953841 - Caterpillar

Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-3532 Track Block Assembly 1
C 260-9412 Lifting Device 1
D 1U-9202 Lever Puller Hoist 1
E - Loctite Graphite-50 Anti-Seize Lubricant –
Illustration 1 g06177941
Attach Tooling (C) and Tooling (D) to track assembly (7).
Illustration 2 g06177939
Illustration 3 g06177937
Attach Tooling (C) to the lower section of track assembly (7).
Raise track assembly (7) from Tooling (B) and position track assembly (7) to master shoe (9). Apply Tooling (E) to the threads of bolts (8) and install bolts (8). Tighten bolts (8) to a torque of 339 68 N m (250 50 lb ft). Tighten bolts (8) for an extra 180 5 degrees.
Illustration 4 g06239861
Tighten valve (6) to a torque of 35 5 N m (26 4 lb ft). Adjust the track tension. Refer to Operation and Maintenance Manual, "Track - Adjust" for the correct procedure.
Illustration 5 g06239857
Position cover assembly (5) and install bolts (4).
Illustration 6 g01099092
Position guard assemblies (3) and install bolts (1) and (2).