BLOCK 1P3600 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01144602
Disconnect harness assembly (1) .
Remove injection actuation pressure sensor (2). Remove the O-ring seal from the injection actuation pressure sensor.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01144602
Install the O-ring seal on injection actuation pressure sensor (2).
Install injection actuation pressure sensor (2) and tighten to a torque of 20 2 N m (177 18 lb in).
Connect harness assembly (1) .