BLOCK GP 2008094 - Caterpillar

Illustration 23 g01274080
Install guards (38) .
Illustration 24 g01274085
Illustration 25 g01274078
Connect harness assembly (36). Install cap (35). Install clamp (37) .
Illustration 26 g01274075
Connect ground strap (34) and cable assembly (33). Install cable assemblies (31). Connect bracket (32) .
Illustration 27 g01274073
Position refrigerant compressor (30) and install bolts (29) .
Illustration 28 g01273992
Connect heater hoses (27) and (28). Open the valves for hoses (27) and (28). Connect hose (26) that connects to the water pump.
Illustration 29 g01273989
Install boot (25) .
Illustration 30 g01273988
Connect harness assembly (24). Connect cable assemblies (20) and (22). Connect harness assembly (21). Connect hose (19). Install cable strap (23).
Illustration 31 g01273987
Position harness assemblies (16) and (17) and install bolt (18). Connect harness assembly (17) .
Illustration 32 g01273974
Connect hose assembly (13) and hose (14). Connect harness assembly (11), (12), and (15).
Illustration 33 g01273972
Connect harness assembly (10). Install cable straps (8) and (9) .
Illustration 34 g01273971
Connect hose assemblies (7) and (6) .
Illustration 35 g01273970
Place hose assemblies (4) and (5) into position and install clip (3). Connect tube assembly (4) .
Illustration 36 g01273969
Install tube (2). Connect hose (1) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Turn the battery disconnect switch into the ON position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".End By:
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Install".
Install the fan. Refer to Disassembly and Assembly, "Reversible Fan - Install".