BLOCK GP-BOOM SHEAVE 2073680 - Caterpillar

2073680 BLOCK GP-BOOM SHEAVE Caterpillar parts 583R, 583T, 587R, 587T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2073680
207-3680
2073680

Caterpillar 2073680 BLOCK GP-BOOM SHEAVE

Weight: 269 pounds 122 kg.

Buy BLOCK GP-BOOM SHEAVE 2073680 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER,

Compatible equipment models: 2073680:

PIPELAYER 583R 583T 587R 587T Caterpillar

Number on catalog scheme: 4

Caterpillar 2073680 Parts scheme BLOCK GP-BOOM SHEAVE

For full view, you need register

Information:

To prevent possible injury, make sure all of the air pressure is released from the air tank before you disconnect the test gauges and the hose assemblies.
Note: If the performance checks indicate that air pressure is not available at the supply passage(s) of the control valves, loosen the connection at the supply passage and use soapy water in order to check for air pressure.If the performance checks give an indication of leakage through a control valve, disconnect the delivery hose at the end opposite the delivery passage. Put the end of the hose in a pan of water to check for leakage.ProblemThe service brakes do not engage correctly.Probable Cause
There is no air pressure at the inlet passage of the brake control valve.
Wear or damage to the brake control valve permits little air pressure or no air pressure at the outlet passages.
Wear or damage to the components between the brake control valve and the tractor brake actuators is preventing the flow of air.
Wear or damage to the scraper relay valve permits little air pressure or no air pressure at the delivery passages to the brake actuators.
Wear or damage to the tractor relay valve permits little air pressure or no air pressure at the delivery passages to the brake actuators.
The brake actuators have wear or damage.
Wear or damage to the double check valves that are located by the scraper brakes.
The brakes have wear or damage.ProblemThe service brakes do not release correctly.Probable Cause
Mud or dirt under the pedal does not allow the service brake control valve to release fully.
Wear or damage to the service brake control valve restricts the release of air pressure to the tractor relay valve on the brake actuators and/or the scraper relay valve.
Wear or damage to the scraper relay valve restricts the release of air pressure from the scraper brake actuator.
Wear or damage to the tractor relay valve restricts the release of air pressure from the scraper brake actuator.
The components between the service brake control valve and the tractor brake actuators have