BLOCK 2092435 - Caterpillar

Use Tooling (M) in order to remove retaining ring (117). Remove sun gear (118) from output shaft assembly (116) .
Illustration 99 g00589267
Remove seal ring (119) from sun gear (118) .
Illustration 100 g01022069
Attach Tooling (D) and a suitable lifting device to planetary carrier (112). Remove planetary carrier (112) from output shaft assembly (116). The weight of planetary carrier (112) is approximately45 kg (100 lb). Remove Tooling (D) and the suitable lifting device.
Illustration 101 g00589272
Use Tooling (K) in order to remove retaining ring (120) from planetary carrier (112) .
Illustration 102 g00589273
Use a brass drift in order to remove ball bearing (121) from planetary carrier (112) .
Illustration 103 g00589274
Use a brass drift in order to drive spring pin (not shown) toward the center of planetary shaft assembly (122) .
Illustration 104 g00589276
Remove planetary shaft assembly (122) from planetary carrier (112) .
Illustration 105 g00589277
Use a suitable drift in order to remove spring pin (123) from planetary shaft assembly (122) .
Illustration 106 g00589278
Remove planetary gear (124) and thrust discs (125) from planetary carrier (112) .
Illustration 107 g00589280
Remove roller bearing (126) from planetary gear (124) .
Repeat Steps 101 through 105 for the remaining planetary shaft assemblies.
Illustration 108 g00596457
Remove sun gear (127) from output shaft assembly (116) .
Illustration 109 g00596458
Remove hub (128) from output shaft assembly (116) .
Illustration 110 g00605137
Remove ring (129) from output shaft assembly (116) .
Illustration 111 g00589284
Remove sleeve bearing (130) from shaft assembly (116) .
Illustration 112 g00589285
Remove sleeve bearing (131) from shaft assembly (116) .