BLOCK 2825983 - Caterpillar

When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cable to the rear tow point. Install the rear tow point pin through the end of the retaining cable.Failure to properly secure the body (bed) may result in personal injury or death.
Do not move the hoist control to the LOWER position when the body retaining cable is installed between the dump body and the rear tow pin. When the hoist control is in the LOWER position, hydraulic force may cause the body retaining cable to fail with the potential for injury or death.
Illustration 1 g00336806
Illustration 2 g00287354
Retaining CableA complete inspection of the truck frame should occur at every 500 hours.
Raise the body until the rear tow point pin aligns with the retaining cable end from the body. Install the rear tow point pin.
Clean the frame with a high pressure washer.
Illustration 3 g00321325
Inspect the frame for damage and for cracks. If you find cracks or damage, consult your Caterpillar dealer for specific repair procedures. Do not operate the machine until the necessary repairs have been made.