BLOCK-RUBBER 2N4620 - Caterpillar

Removal Procedure
Illustration 4 g06135337
(B) 380-5964 Camera Display Gp
Remove camera display group (B).
Illustration 5 g06135737
(C) Screw
(D) Display module group
Remove the two screws (C) from the top of cab arrangement and discard the display module group (D).
Illustration 6 g06135743
(E) Harness assembly
(F) Cable straps
Disconnect the harness assembly (E) by removing cable straps (F).Installation Procedure
Illustration 7 g06135353
(1) 464-6047 Display Module Gp
(2) 259-4399 Base
(3) 7Y-7388 Screws
(4) 4B-4274 Washers
Attach base (2) to display module (1) using four screws (3), and four washers (4).
Illustration 8 g06135378
(2) 259-4399 Base
(5) 380-5963 Bracket As
(6) 8T-3991 Screws
(7) 9X-8256 Washer
Attach base (2) to bracket assembly (5) using four screws (6) and four washers (7).
Illustration 9 g06135382
(2) 259-4399 Base
(5) 380-5963 Bracket As
(8) 3E-8020 Screw
(9) 270-3311 Clamp
(G) 505-5843 Cab Ar
Attach clamp (9) to base (2). Loosen clamp (9) until the clamp fits over the bases.
Assemble bracket assembly (5) to the top of cab arrangement (G) using two screws (8).
Illustration 10 g06135404
(1) 464-6047 Display Module Gp
(10) 9X-2045 Screw
(11) 4E-8722 Nut
(12) 114-6658 Washer
Connect harness to display module group (1) and route harness using screw (10), nut (11), and washer (12).
Illustration 11 g06135406
(13) 394-6930 Motor Harness As
(14) 7K-1181 Cable Straps
(15) 468-8101 Cable As
(16) Cab coaxial cable
(17) Monitor coaxial cable
Connect monitor coaxial cable (17) to motor harness assembly (13) using cable straps (14).
Connect cab coaxial cable (16) to cable assembly (15) using cable straps (14).
Illustration 12 g06135416
(11) 4E-8722 Nut
(13) 394-6930 Motor Harness As
(14) 7K-1181 Cable Straps
(18) 9X-6155 Bolt
(H) 361-7168 Cab Trim Gp
Connect motor harness assembly (13) to the main cab harness connector C-C52.
Secure motor harness assembly (13) to the main cab harness using four cable straps (14).
Connect bolt (18), and nut (11) to cab trim group (H).For further information refer to Special Instruction, REHS7242, "WAVS Generic Installation Guide for Certain Cat® Products".