BLOCK 2R1462 - Caterpillar

Touch Screen Monitoring System
The Track Type Tractors covered in this manual are equipped with a touch screen monitoring system.Reference Systems Operation / Testing and Adjusting, UENR3659Startup
At machine startup, the "Fluid Levels" screen will appear. The "Fluid Levels" screen reports the status of the machine fluid levels.
Press the "OK" button to acknowledge the fluid levels check. The main Performance page of the display will appear.
If a "Fault" message appears in the lower information banner (1) , press that area for additional information.Reference Systems Operation / Testing and Adjusting, UENR3659, "Service Menu"
Illustration 1 g03555856
(1) Information bannerPower Train Limp Home
"Power Train Limp Home Mode" enables operation of the machine (in a limited mode) should the machine steering system be in a faulted condition. The ECM will automatically respond to the situation by sending a warning message to the screen based on the fault. Instructions will then appear on the screen to provide further information and guidance.
Illustration 2 g03555956
(2) Back button
Press the "OK" button to enter the "Power Train Limp Home Mode", the first screen that appears is the "Enter Limp Home" screen.Press the Back button (2) to forego entry into the "Power Train Limp Home Mode".
Press the "OK" button to proceed. Another screen will appear and provide specific instructions relating to the fault.
Follow the instructions on the screen.Note: Press the "Back" button (2) at any time to cancel or exit the "Powertrain Limp Home Mode".Power Train Limp Home Screens Examples
Following are examples of limp home screens.
Illustration 3 g03555978
Illustration 4 g03556000