BLOCK AS-FUSE 3060282 - Caterpillar

Removal Procedure
Start By:
Remove the seat.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Turn the battery disconnect switch to the OFF position.
Recover the refrigerant. Refer to Service Manual, SENR5664, ""All Products Air Conditioning and Heating R-134a for All Caterpillar Machines" " for the recovery and charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g03653798
Remove bolts (1) and plate (2).
Illustration 2 g03654364
Disconnect hose assemblies (3) from heater and air conditioning group (4).
Illustration 3 g03654368
Remove screws (6), screws (7), and storage box (5).
Illustration 4 g03654369
Remove screw (9) and frame assembly (8).
Illustration 5 g03654370
Remove screw (11) and rubber mat (10).
Illustration 6 g03654371
Remove bolts (12), plate (13), and the gasket.
Illustration 7 g03654347
Remove seals (14).
Illustration 8 g03654357
Remove screws (16) and plate (15). Remove screws (18) and (19). Remove evaporator coil (17). Installation Procedure
Install evaporator coil (17) in the reverse order of removal.