BLOCK GP-LUB 5139644 - Caterpillar

Table 1
Required Parts
Item Qty New Part Number Part Name
1 1 7T-1099 Link
2 6 178-3620 Dual Cable Strap
3 4 6V-0683 Grommet
4 1 7K-1181 Cable Strap Clamping Procedure
Clean and remove paint from the left tower wall in front of the stauff clamp. Move the harness out of the way to prevent damage to the harness.
Illustration 1 g06128788
(1) 7T-1099 Link
(4) 7K-1181 Cable Strap
Illustration 2 g06123350
Link locating dimensions
(1) 7T-1099 Link
Weld link (1) to the left tower wall in front of the stauff clamp. See Illustrations 1 and 2 above for placement and dimensions.
Apply paint to any bare metal to prevent corrosion.
Illustration 3 g06127907
(2) 178-3620 Cable Strap
(3) 6V-0683 Grommet
Install three grommet (3) on the work tool harness in locations shown in Illustration 3. Secure the work tool harness to the lower auxiliary hose using four cable straps (2).
Illustration 4 g06127912
Install fourth grommet (3) and secure the work tool harness to the lower auxiliary hose using two cable straps (2).