BLOCK A 6A6196 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01188366
Install control manifold (16) and mounting bolts (18) .
Connect hose assembly (17) .
Illustration 2 g01188364
Connect hose assembly (15) .
Illustration 3 g01188363
Connect hose assemblies (13) and (14) .
Illustration 4 g01188361
Connect harness assemblies (12) .
Connect hose assemblies (10) and (11) .
Illustration 5 g01188360
Connect hose assemblies (9) .
Illustration 6 g01188358
Connect hose assembly (7) and harness assembly (8) .
Illustration 7 g01188357
Connect hose assemblies (5) and (6) .
Illustration 8 g01188367
Connect hose assemblies (2), (3), and (4) .
Illustration 9 g01188355
The upper frame is inverted in order to show the guard locations.
Install guard (1) .
Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Refill Capacities".