BLOCK 6A6397 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01189594
Use Tooling (A) and a suitable lifting device to position swing motor (6). The weight of swing motor (6) is approximately 82 kg (180 lb).
Install bolts (7) .
Illustration 2 g01189593
Connect hose assemblies (3), (4), and (5) .
Illustration 3 g01189592
Install bolt (1) in order to connect bracket (2) .End By: Install the swing control valve. Refer to Disassembly and Assembly, "Swing Control Valve - Install".