BLOCK CYLINDER 7N8600 - Caterpillar

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Attachment Arm and Cylinder Linkage
Lubricate Fittings
Wipe all fittings before lubricating. Lubricate 12 fittings on the left side of the machine. Lubricate 12 fittings on the right side of the machine.Total of 24 fittings.Rear Axle Trunnion Bearings
Lubricate two remote fittings for the rear axle trunnion. The fittings are located inside the engine compartment on the left side of the machine.Steering Cylinder Bearings
Lubricate one remote fitting located on the machine frame for the head end of the steering cylinder on each side of the machine. Lubricate one fitting in the rod end of the steering cylinder on each side of the machine.Total of four fittings.