BOARD-CIRCUIT 4389069 - Caterpillar

Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service or repair the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
232-3706 Stick Lines Group - 00
( 208-3515 Auxiliary Hydraulic Lines Gp - 02)    
Item    Qty    Part No    Description    
(1)     10     7K-1181     Cable Strap    
(2)     2     6V-9746     O-Ring Seal    
(3)     2     208-2819     Hose As    
(4)     2     148-8414     Reducer As    
(5)     1     139-6797     Bracket    
(6)     1     139-7459     Bracket    
(7)     2     208-1246     Manifold    
(8)     2     148-8322     Connector As    
(9)     4     141-6348     Bolt    
(10)     8     8T-4121     Washer    
(11)     8     8T-4193     Bolt    
(12)     4     8T-4191     Bolt    
(13)     4     4D-9164     Clip    
(14)     1     209-4967     Bracket    
(15)     1     209-4968     Bracket    
(16)     8     7X-2553     Bolt    
(17)     2     207-9588     Tube As    
Illustration 2 g02297640
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g02297895
VIEW OF AREA A
Remove the existing bolts and use two bolts (11) to attach bracket (14) to right-hand side of