BODY 0814218 - Caterpillar

Illustration 1 g06054609
Table 1
Specification for 504-2106 Bucket Linkage Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the pin bores and the bushings before assembly. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge.
1 1 492-8534 Pin Diameter is 79.85 0.04 mm (3.144 0.002 inch).
2 - - During assembly of linkage group on the machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.
3 2 244-8504 Pin As Diameter is 79.85 0.04 mm (3.144 0.002 inch).
4 1 492-8533 Pin Diameter is 69.85 0.04 mm (2.750 0.002 inch).
5 6 166-1494 Lip Type Seal Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss.
6 2 244-4360 Bushing Install the bush in the bore so that the part number of each bush is facing outward.
Bore before assembly is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 2 240-2912 Bushing Install the bush in the bore so that the part number of each bush is facing outward.
Bore before assembly is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth is 9.5 0.2 mm (0.37 0.01 inch).
8 2 451-2183 Nut Position the nut (8) to the distance of 0.5 mm (0.02 inch) past the end of the bolt. For locking, tighten the nut (9) against the nut (8).
Torque to 175 30 N m (129 22 lb ft).
9 2 451-2183 Nut