BODY & CANOPY AS 1807038 - Caterpillar

Transmission Control Adjustments
Illustration 1 g00509103
Illustration 2 g00509104
(1) Testing and Adjusting, "Hand Control Group"Torque for all locknuts on cable assembly that hold the rod ends in place. ... 6 1 N m (53 9 lb in)Torque for all locknuts that fasten the cable assemblies to cover (17) and cover (20). ... 38 7 N m (28 5 lb ft) (7) Dimension ... 12 2 mm (0.47 0.08 inch) (8) Dimension ... 12 2 mm (0.47 0.08 inch)Forward/Reverse Assembly Procedure
Engage the parking brake.
At the transmission, move the transmission rotary selector spool to the NEUTRAL position.
Assemble cable (4) to the dimensions that are shown in View B-B.
Adjust cable (4) in order to allow the free fit of pin assembly (9) into the transmission bellcrank. To adjust the cable, remove the bolts that hold cover (5) to the housing. Loosen the locknut that is on cable (4). Turn cover (5), as required.Speed Control Assembly Procedure
Assemble cable (3) to the dimensions that are shown in View B-B.
At the transmission, move the transmission speed selector spool to the SECOND GEAR position.
Turn handle (2) to the SECOND GEAR position.
Adjust cable (3) in order to allow the free fit of pin assembly (10) into the transmission bellcrank. To adjust the cable, remove the bolts that hold cover (6) to the housing. Loosen the locknut on cable (3) and turn cover (6), as required.