BODY-PISTON 1P0391 - Caterpillar

Illustration 1 g01265369
(1) Apply sealant to the threads. (2) Apply sealant to the threads. Torque for the six plugs ... 13 2 N m (10 1 lb ft) (3) Apply sealant to the threads. Torque for the plug ... 13 2 N m (10 1.5 lb ft) (4) 096-4389 Spring Length under test force ... 31.00 mm (1.22 inch) Test force ... 360 49 N (81 11 lb) Free length after test ... 33.70 mm (1.330 inch) Outside diameter ... 7.50 mm (0.300 inch)Note: Lubricate internal sliding surfaces lightly with hydraulic oil.Note: Lubricate all bores and all shafts lightly. Lubricate the bores with the lubricant that is being sealed.Pump Control Valve
Illustration 2 g01265537
298-8921 Pump Head Group (1) 263-1202 Spring Length under test force ... 75.00 mm (2.950 inch) Test force ... 772 38 N (174 9 lb) Free length after test ... 104.69 mm (4.120 inch) Outside diameter ... 28 .15 mm (1.100 0.010 inch) (2) Torque for the piston ... 350 30 N m (260 22 lb ft) (3) 270-8937 Spring Length under test force ... 25.90 mm (1.020 inch) Test force ... 59.00 3.00 N (13.260 0.670 lb) Free length after test ... 27.60 mm (1.090 inch) Outside diameter ... 22.70 .20 mm (0.890 0.010 inch) (4) Torque for the nut ... 177 15 N m (130 11 lb ft) (5) Torque for the nut ... 45 5 N m (33 3 lb ft) (6) Torque for the nut ... 98 9.8 N m (70 7 lb ft) (7) 288-1331 Spring Length under test force ... 44.80 mm (1.760 inch) Test force ... 53.30 N (11.98 lb) Free length after test ... 47.40 mm (1.870 inch) Outside diameter ... 24.00 mm (0.940 inch) (8) 288-1332 Spring Length under test force ... 34.60 mm (1.360 inch) Test force ... 16.30 N (3.66 lb) Free length after test ... 35.10 mm (1.380 inch) Outside diameter ... 15.50 mm (0.610 inch) (9) 099-3671 Spring Length under test force ... 14.50 mm (0.570 inch) Test force ... 8.80 .70 N (1.98 0.16 lb) Free length after test ... 26.50 mm (1.040 inch) Outside diameter ... 15 mm (0.590 inch) (10) Tighten the five 094-1882 Plugs to the following torque. ... 13 2 N m (10 1 lb ft) (11) Apply 154-9731 Thread Lock Compound to the pin assembly.Note: Lubricate all bores lightly. Lubricate the bore with the lubricant that is being sealed.Note: Lubricate internal sliding surfaces lightly with hydraulic oil.